.xx "" "/functions of HP 2640 and" "2621-series terminals." "" hp.1
.xx "" "handle special functions of HP" "2640 and 2621-series/" "hp:" hp.1
.xx "archiver." "hpio: HP" "2645A terminal tape file" "" hpio.1
.xx "functions of DASI 300 and/" "" "300, 300s: handle special" "" 300.1
.xx "" "/special functions of DASI" "300 and 300s terminals." "" 300.1
.xx "of DASI 300 and 300s/" "300," "300s: handle special functions" "" 300.1
.xx "" "functions of DASI 300 and" "300s terminals." "/special" 300.1
.xx "" "l3tol, ltol3: convert between" "3-byte integers and long/" "" l3tol.3c
.xx "comparison." "diff3:" "3-way differential file" "" diff3.1
.xx "Tektronix 4014 terminal." "" "4014: paginator for the" "" 4014.1
.xx "" "paginator for the Tektronix" "4014 terminal." "4014:" 4014.1
.xx "of the DASI 450 terminal." "" "450: handle special functions" "" 450.1
.xx "" "special functions of the DASI" "450 terminal." "450: handle" 450.1
.xx "long integer and base-64/" "" "a64l, l64a: convert between" "" a64l.3c
.xx "" "" "abort: generate an IOT fault." "" abort.3c
.xx "value." "" "abs: return integer absolute" "" abs.3c
.xx "" "abs: return integer" "absolute value." "" abs.3c
.xx "" "/floor, ceiling, remainder," "absolute value functions." "" floor.3m
.xx "socket." "accept:" "accept a connection on a" "" accept.2
.xx "a socket." "" "accept: accept a connection on" "" accept.2
.xx "LP requests." "" "accept, reject: allow/prevent" "" accept.1m
.xx "" "utime: set file" "access and modification times." "" utime.2
.xx "of a file." "touch: update" "access and modification times" "" touch.1
.xx "accessibility of a file." "" "access: determine" "" access.2
.xx "machine/" "sputl, sgetl:" "access long numeric data in a" "" sputl.3x
.xx "" "phys: allow a process to" "access physical addresses." "" phys.2
.xx "" "sadp: disk" "access profiler." "" sadp.1
.xx "" "copy file systems for optimal" "access time." "dcopy:" dcopy.1m
.xx "" "/setutent, endutent, utmpname:" "access utmp file entry." "" getut.3c
.xx "" "access: determine" "accessibility of a file." "" access.2
.xx "" "enable or disable process" "accounting." "acct:" acct.2
.xx "" "acctcon2: connect-time" "accounting." "acctcon1," acctcon.1m
.xx "" "acctprc1, acctprc2: process" "accounting." "" acctprc.1m
.xx "" "turnacct: shell procedures for" "accounting." "/startup," acctsh.1m
.xx "" "runacct: run daily" "accounting." "" runacct.1m
.xx "" "/accton, acctwtmp: overview of" "accounting and miscellaneous/" "" acct.1m
.xx "" "accounting and miscellaneous" "accounting commands." "/of" acct.1m
.xx "" "acct: per-process" "accounting file format." "" acct.4
.xx "" "search and print process" "accounting file(s)." "acctcom:" acctcom.1
.xx "" "acctmerg: merge or add total" "accounting files." "" acctmerg.1m
.xx "" "summary from per-process" "accounting records." "/command" acctcms.1m
.xx "" "wtmpfix: manipulate connect" "accounting records." "fwtmp," fwtmp.1m
.xx "process accounting." "" "acct: enable or disable" "" acct.2
.xx "file format." "" "acct: per-process accounting" "" acct.4
.xx "per-process accounting/" "" "acctcms: command summary from" "" acctcms.1m
.xx "process accounting file(s)." "" "acctcom: search and print" "" acctcom.1
.xx "connect-time accounting." "" "acctcon1, acctcon2:" "" acctcon.1m
.xx "accounting." "acctcon1," "acctcon2: connect-time" "" acctcon.1m
.xx "acctwtmp: overview of/" "" "acctdisk, acctdusg, accton," "" acct.1m
.xx "overview of/" "acctdisk," "acctdusg, accton, acctwtmp:" "" acct.1m
.xx "accounting files." "" "acctmerg: merge or add total" "" acctmerg.1m
.xx "" "acctdisk, acctdusg," "accton, acctwtmp: overview of/" "" acct.1m
.xx "accounting." "" "acctprc1, acctprc2: process" "" acctprc.1m
.xx "" "acctprc1," "acctprc2: process accounting." "" acctprc.1m
.xx "" "acctdisk, acctdusg, accton," "acctwtmp: overview of/" "" acct.1m
.xx "" "sin, cos, tan, asin," "acos, atan, atan2:/" "" trig.3m
.xx "" "killall: kill all" "active processes." "" killall.1m
.xx "" "current SCCS file editing" "activity." "sact: print" sact.1
.xx "" "report process data and system" "activity." "/time a command;" timex.1
.xx "" "sag: system" "activity graph." "" sag.1g
.xx "" "sa1, sa2, sadc: system" "activity report package." "" sar.1m
.xx "" "sar: system" "activity reporter." "" sar.1
.xx "" "random, hopefully interesting," "adage." "fortune: print a" fortune.6
.xx "formatting/" "mosd: the OSDD" "adapter macro package for" "" mosd.5
.xx "" "" "adb: debugger." "" adb.1
.xx "" "acctmerg: merge or" "add total accounting files." "" acctmerg.1m
.xx "" "up internet hosts by name or" "address." "rhost, raddr: look" rhost.3
.xx "socket." "socketaddr: return" "address associated with a" "" socketaddr.2
.xx "" "a process to access physical" "addresses." "phys: allow" phys.2
.xx "SCCS files." "" "admin: create and administer" "" admin.1
.xx "" "admin: create and" "administer SCCS files." "" admin.1
.xx "game." "" "adventure: an exploration" "" adventure.6
.xx "" "alarm: set a process's" "alarm clock." "" alarm.2
.xx "clock." "" "alarm: set a process's alarm" "" alarm.2
.xx "delivermail." "" "aliases: aliases file for" "" aliases.7
.xx "" "aliases:" "aliases file for delivermail." "" aliases.7
.xx "earth." "aliens: The" "alien invaders attack the" "" aliens.6
.xx "attack the earth." "" "aliens: The alien invaders" "" aliens.6
.xx "" "change data segment space" "allocation." "brk, sbrk:" brk.2
.xx "" "realloc, calloc: main memory" "allocator." "malloc, free," malloc.3c
.xx "physical addresses." "phys:" "allow a process to access" "" phys.2
.xx "" "accept, reject:" "allow/prevent LP requests." "" accept.1m
.xx "information for bad block/" "" "altblk: alternate block" "" altblk.4
.xx "for bad block/" "altblk:" "alternate block information" "" altblk.4
.xx "" "sort: sort" "and/or merge files." "" sort.1
.xx "terminal." "worms:" "animate worms on a display" "" worms.6
.xx "" "rain:" "animated raindrops display." "" rain.6
.xx "" "bcd: convert to" "antique media." "" bcd.6
.xx "editor output." "" "a.out: assembler and link" "" a.out.4
.xx "" "introduction to commands and" "application programs." "intro:" intro.1
.xx "" "maintenance commands and" "application programs." "/system" intro.1m
.xx "maintainer." "" "ar: archive and library" "" ar.1
.xx "format." "" "ar: archive (library) file" "" ar.4
.xx "" "number: convert" "Arabic numerals to English." "" number.6
.xx "" "delivermail: deliver mail to" "arbitrary people." "" delivermail.8
.xx "language." "bc:" "arbitrary-precision arithmetic" "" bc.1
.xx "" "cpio: format of cpio" "archive." "" cpio.4
.xx "" "tp: manipulate tape" "archive." "" tp.1
.xx "maintainer." "ar:" "archive and library" "" ar.1
.xx "" "ar:" "archive (library) file format." "" ar.4
.xx "" "HP 2645A terminal tape file" "archiver." "hpio:" hpio.1
.xx "" "tar: tape file" "archiver." "" tar.1
.xx "" "cpio: copy file" "archives in and out." "" cpio.1
.xx "command." "xargs: construct" "argument list(s) and execute" "" xargs.1
.xx "" "getopt: get option letter from" "argument vector." "" getopt.3c
.xx "" "echo: echo" "arguments." "" echo.1
.xx "" "expr: evaluate" "arguments as an expression." "" expr.1
.xx "" "bc: arbitrary-precision" "arithmetic language." "" bc.1
.xx "number facts." "" "arithmetic: provide drill in" "" arithmetic.6
.xx "" "expr: evaluate arguments" "as an expression." "" expr.1
.xx "" "" "as: assembler." "" as.1
.xx "characters." "asa: interpret" "ASA carriage control" "" asa.1
.xx "control characters." "" "asa: interpret ASA carriage" "" asa.1
.xx "" "ascii: map of" "ASCII character set." "" ascii.5
.xx "" "/translates object files into" "ASCII formats suitable for/" "" hex.1
.xx "set." "" "ascii: map of ASCII character" "" ascii.5
.xx "" "long integer and base-64" "ASCII string." "/convert between" a64l.3c
.xx "number." "atof: convert" "ASCII string to floating-point" "" atof.3c
.xx "and/" "ctime, localtime, gmtime," "asctime, tzset: convert date" "" ctime.3c
.xx "trigonometric/" "sin, cos, tan," "asin, acos, atan, atan2:" "" trig.3m
.xx "" "help:" "ask for help." "" help.1
.xx "" "as:" "assembler." "" as.1
.xx "output." "a.out:" "assembler and link editor" "" a.out.4
.xx "assertion." "" "assert: verify program" "" assert.3x
.xx "" "assert: verify program" "assertion." "" assert.3x
.xx "" "setbuf:" "assign buffering to a stream." "" setbuf.3s
.xx "" "socketaddr: return address" "associated with a socket." "" socketaddr.2
.xx "" "sin, cos, tan, asin, acos," "atan, atan2: trigonometric/" "" trig.3m
.xx "" "cos, tan, asin, acos, atan," "atan2: trigonometric/" "sin," trig.3m
.xx "floating-point number." "" "atof: convert ASCII string to" "" atof.3c
.xx "integer." "strtol, atol," "atoi: convert string to" "" strtol.3c
.xx "integer." "strtol," "atol, atoi: convert string to" "" strtol.3c
.xx "" "aliens: The alien invaders" "attack the earth." "" aliens.6
.xx "" "autorobots: Escape from the" "automatic robots." "" autorobots.6
.xx "automatic robots." "" "autorobots: Escape from the" "" autorobots.6
.xx "" "wait:" "await completion of process." "" wait.1
.xx "processing language." "" "awk: pattern scanning and" "" awk.1
.xx "" "ungetc: push character" "back into input stream." "" ungetc.3s
.xx "" "" "back: the game of backgammon." "" back.6
.xx "" "back: the game of" "backgammon." "" back.6
.xx "" "daily/weekly UNIX file system" "backup." "filesave, tapesave:" filesave.1m
.xx "" "finc: fast incremental" "backup." "" finc.1m
.xx "" "frec: recover files from a" "backup tape." "" frec.1m
.xx "" "block information for" "bad block handling." "/alternate" altblk.4
.xx "" "/program to set or update" "bad block information." "" badblk.1m
.xx "update bad block information." "" "badblk: program to set or" "" badblk.1m
.xx "" "" "banner: make posters." "" banner.1
.xx "" "banner7: print large" "banner on printer." "" banner7.1
.xx "printer." "" "banner7: print large banner on" "" banner7.1
.xx "" "terminal capability data" "base." "termcap:" termcap.5
.xx "port." "ttytype: data" "base of terminal types by" "" ttytype.4
.xx "" "between long integer and" "base-64 ASCII string." "/convert" a64l.3c
.xx "" "(visual) display editor" "based on ex." "/screen oriented" vi.1
.xx "portions of path names." "" "basename, dirname: deliver" "" basename.1
.xx "arithmetic language." "" "bc: arbitrary-precision" "" bc.1
.xx "" "" "bcd: convert to antique media." "" bcd.6
.xx "system initialization/" "brc," "bcheckrc, rc, powerfail:" "" brc.1m
.xx "" "" "bcopy: interactive block copy." "" bcopy.1m
.xx "" "" "bdiff: big diff." "" bdiff.1
.xx "" "cb: C program" "beautifier." "" cb.1
.xx "" "list contents of directory" "(Berkeley version)." "ls7:" ls7.1
.xx "" "j0, j1, jn, y0, y1, yn:" "Bessel functions." "" bessel.3m
.xx "" "" "bfs: big file scanner." "" bfs.1
.xx "" "strings in an object, or other" "binary file." "/the printable" strings.1
.xx "" "fread, fwrite:" "binary input/output." "" fread.3s
.xx "" "bsearch:" "binary search." "" bsearch.3c
.xx "" "tdelete, twalk: manage" "binary search trees." "tsearch," tsearch.3c
.xx "" "remove symbols and relocation" "bits." "strip:" strip.1
.xx "" "reset: reset the teletype" "bits to a sensible state." "" reset.1
.xx "" "" "bj: the game of black jack." "" bj.6
.xx "" "bj: the game of" "black jack." "" bj.6
.xx "" "sync: update the super" "block." "" sync.1
.xx "" "bcopy: interactive" "block copy." "" bcopy.1m
.xx "" "sum: print checksum and" "block count of a file." "" sum.1
.xx "" "block information for bad" "block handling." "/alternate" altblk.4
.xx "" "program to set or update bad" "block information." "badblk:" badblk.1m
.xx "block/" "altblk: alternate" "block information for bad" "" altblk.4
.xx "" "blt, blt512:" "block transfer data." "" blt.3
.xx "" "df: report number of free disk" "blocks." "" df.1m
.xx "" "sum7: sum and count" "blocks in a file." "" sum7.1
.xx "data." "" "blt, blt512: block transfer" "" blt.3
.xx "" "blt," "blt512: block transfer data." "" blt.3
.xx "" "/etc/hosts: host table for" "bnet." "" hosts.7
.xx "" "netmail: the" "bnet network mail system." "" netmail.8
.xx "" "" "boot: startup procedures." "" boot.8
.xx "system initialization shell/" "" "brc, bcheckrc, rc, powerfail:" "" brc.1m
.xx "space allocation." "" "brk, sbrk: change data segment" "" brk.2
.xx "modest-sized programs." "" "bs: a compiler/interpreter for" "" bs.1
.xx "" "" "bsearch: binary search." "" bsearch.3c
.xx "" "stdio: standard" "buffered input/output package." "" stdio.3s
.xx "" "setbuf: assign" "buffering to a stream." "" setbuf.3s
.xx "" "mknod:" "build special file." "" mknod.1m
.xx "" "swab: swap" "bytes." "" swab.3c
.xx "" "cc:" "C compiler." "" cc.1
.xx "" "cflow: generate" "C flow graph." "" cflow.1
.xx "" "cpp: the" "C language preprocessor." "" cpp.1
.xx "" "maintain a tags file for a" "C program." "ctags:" ctags.1
.xx "" "cb:" "C program beautifier." "" cb.1
.xx "" "lint: a" "C program checker." "" lint.1
.xx "" "cxref: generate" "C program cross reference." "" cxref.1
.xx "" "message file by massaging" "C source." "/create an error" mkstr.1
.xx "" "" "cal: print calendar." "" cal.1
.xx "" "dc: desk" "calculator." "" dc.1
.xx "" "cal: print" "calendar." "" cal.1
.xx "" "" "calendar: reminder service." "" calendar.1
.xx "" "data returned by stat system" "call." "stat:" stat.5
.xx "" "cu:" "call another UNIX System." "" cu.1c
.xx "" "malloc, free, realloc," "calloc: main memory allocator." "" malloc.3c
.xx "" "link and unlink system" "calls." "link, unlink: exercise" link.1m
.xx "" "intro: introduction to system" "calls and error numbers." "" intro.2
.xx "to an LP line printer." "lp," "cancel: send/cancel requests" "" lp.1
.xx "" "termcap: terminal" "capability data base." "" termcap.5
.xx "" "cribbage: the" "card game cribbage." "" cribbage.6
.xx "" "pnch: file format for" "card images." "" pnch.4
.xx "" "asa: interpret ASA" "carriage control characters." "" asa.1
.xx "files." "" "cat: concatenate and print" "" cat.1
.xx "" "" "cb: C program beautifier." "" cb.1
.xx "" "" "cc: C compiler." "" cc.1
.xx "" "" "cd: change working directory." "" cd.1
.xx "commentary of an SCCS delta." "" "cdc: change the delta" "" cdc.1
.xx "ceiling, remainder,/" "floor," "ceil, fmod, fabs: floor," "" floor.3m
.xx "" "/ceil, fmod, fabs: floor," "ceiling, remainder, absolute/" "" floor.3m
.xx "" "" "cflow: generate C flow graph." "" cflow.1
.xx "" "delta: make a delta" "(change) to an SCCS file." "" delta.1
.xx "" "pipe: create an interprocess" "channel." "" pipe.2
.xx "stream." "ungetc: push" "character back into input" "" ungetc.3s
.xx "and neqn." "eqnchar: special" "character definitions for eqn" "" eqnchar.5
.xx "file." "freq: report on" "character frequencies in a" "" freq.1
.xx "user." "cuserid: get" "character login name of the" "" cuserid.3s
.xx "" "/getchar, fgetc, getw: get" "character or word from stream." "" getc.3s
.xx "" "/putchar, fputc, putw: put" "character or word on a stream." "" putc.3s
.xx "" "ascii: map of ASCII" "character set." "" ascii.5
.xx "" "interpret ASA carriage control" "characters." "asa:" asa.1
.xx "" "_tolower, toascii: translate" "characters." "/_toupper," conv.3c
.xx "" "iscntrl, isascii: classify" "characters." "/isprint, isgraph," ctype.3c
.xx "" "tr: translate" "characters." "" tr.1
.xx "given/" "sumdir: sum and count" "characters in the files in the" "" sumdir.1
.xx "lastlogin, monacct, nulladm,/" "" "chargefee, ckpacct, dodisk," "" acctsh.1m
.xx "killer robots." "" "chase: Try to escape the" "" chase.6
.xx "directory." "" "chdir: change working" "" chdir.2
.xx "" "/dfsck: file system consistency" "check and interactive repair." "" fsck.1m
.xx "constant-width text for/" "cw," "checkcw: prepare" "" cw.1
.xx "text for nroff or/" "eqn, neqn," "checkeq: format mathematical" "" eqn.1
.xx "" "lint: a C program" "checker." "" lint.1
.xx "" "grpck: password/group file" "checkers." "pwck," pwck.1m
.xx "" "copy file systems with label" "checking." "volcopy, labelit:" volcopy.1m
.xx "systems processed by fsck." "" "checklist: list of file" "" checklist.4
.xx "formatted with the/" "mm, osdd," "checkmm: print/check documents" "" mm.1
.xx "file." "sum: print" "checksum and block count of a" "" sum.1
.xx "" "vchk: version" "checkup." "" vchk.1m
.xx "" "chown," "chgrp: change owner or group." "" chown.1
.xx "" "times: get process and" "child process times." "" times.2
.xx "terminate." "wait: wait for" "child process to stop or" "" wait.2
.xx "" "" "chmod: change mode." "" chmod.1
.xx "" "" "chmod: change mode of file." "" chmod.2
.xx "of a file." "" "chown: change owner and group" "" chown.2
.xx "group." "" "chown, chgrp: change owner or" "" chown.1
.xx "" "" "chroot: change root directory." "" chroot.2
.xx "for a command." "" "chroot: change root directory" "" chroot.1m
.xx "monacct, nulladm,/" "chargefee," "ckpacct, dodisk, lastlogin," "" acctsh.1m
.xx "" "isgraph, iscntrl, isascii:" "classify characters." "/isprint," ctype.3c
.xx "" "uuclean: uucp spool directory" "clean-up." "" uuclean.1m
.xx "" "" "clear: clear terminal screen." "" clear.1
.xx "" "clri:" "clear i-node." "" clri.1m
.xx "" "clear:" "clear terminal screen." "" clear.1
.xx "status/" "ferror, feof," "clearerr, fileno: stream" "" ferror.3s
.xx "" "(command interpreter) with" "C-like syntax." "csh: a shell" csh.1
.xx "" "alarm: set a process's alarm" "clock." "" alarm.2
.xx "" "cron:" "clock daemon." "" cron.1m
.xx "" "" "clock: report CPU time used." "" clock.3c
.xx "" "close:" "close a file descriptor." "" close.2
.xx "descriptor." "" "close: close a file" "" close.2
.xx "" "fclose, fflush:" "close or flush a stream." "" fclose.3s
.xx "" "" "clri: clear i-node." "" clri.1m
.xx "" "" "cmp: compare two files." "" cmp.1
.xx "line-feeds." "" "col: filter reverse" "" col.1
.xx "" "" "comb: combine SCCS deltas." "" comb.1
.xx "" "comb:" "combine SCCS deltas." "" comb.1
.xx "common to two sorted files." "" "comm: select or reject lines" "" comm.1
.xx "" "change root directory for a" "command." "chroot:" chroot.1m
.xx "" "system: issue a shell" "command." "" system.3s
.xx "" "test: condition evaluation" "command." "" test.1
.xx "" "time: time a" "command." "" time.1
.xx "" "argument list(s) and execute" "command." "xargs: construct" xargs.1
.xx "" "nice: run a" "command at low priority." "" nice.1
.xx "" "env: set environment for" "command execution." "" env.1
.xx "" "uux: unix to unix" "command execution." "" uux.1c
.xx "(\fIsh\^\fR/" "nohup: run a" "command immune to hangups" "" nohup.1
.xx "C-like syntax." "csh: a shell" "(command interpreter) with" "" csh.1
.xx "" "getopt: parse" "command options." "" getopt.1
.xx "" "/shell, the standard/restricted" "command programming language." "" sh.1
.xx "and system/" "timex: time a" "command; report process data" "" timex.1
.xx "per-process/" "acctcms:" "command summary from" "" acctcms.1m
.xx "" "and miscellaneous accounting" "commands." "/of accounting" acct.1m
.xx "" "install: install" "commands." "" install.1m
.xx "" "intro: introduction to" "commands and application/" "" intro.1
.xx "" "/to system maintenance" "commands and application/" "" intro.1m
.xx "" "at: execute" "commands at a later time." "" at.1
.xx "" "cdc: change the delta" "commentary of an SCCS delta." "" cdc.1
.xx "" "comm: select or reject lines" "common to two sorted files." "" comm.1
.xx "" "socket: create an endpoint for" "communication." "" socket.2
.xx "" "ipcs: report inter-process" "communication facilities/" "" ipcs.1
.xx "" "stdipc: standard interprocess" "communication package." "" stdipc.3c
.xx "" "diff: differential file" "comparator." "" diff.1
.xx "" "cmp:" "compare two files." "" cmp.1
.xx "SCCS file." "sccsdiff:" "compare two versions of an" "" sccsdiff.1
.xx "" "diff3: 3-way differential file" "comparison." "" diff3.1
.xx "" "dircmp: directory" "comparison." "" dircmp.1
.xx "" "regcmp: regular expression" "compile." "" regcmp.1
.xx "expression." "regcmp, regex:" "compile and execute regular" "" regcmp.3x
.xx "" "regexp: regular expression" "compile and match routines." "" regexp.5
.xx "" "cc: C" "compiler." "" cc.1
.xx "" "fortran: FORTRAN" "compiler." "" fortran.1
.xx "" "yacc: yet another" "compiler-compiler." "" yacc.1
.xx "modest-sized programs." "bs: a" "compiler/interpreter for" "" bs.1
.xx "" "erf, erfc: error function and" "complementary error function." "" erf.3m
.xx "" "wait: await" "completion of process." "" wait.1
.xx "" "pack, pcat, unpack:" "compress and expand files." "" pack.1
.xx "" "cat:" "concatenate and print files." "" cat.1
.xx "" "test:" "condition evaluation command." "" test.1
.xx "" "uvar: returns system-specific" "configuration information." "" uvar.2
.xx "system." "lpadmin:" "configure the LP spooling" "" lpadmin.1m
.xx "" "fwtmp, wtmpfix: manipulate" "connect accounting records." "" fwtmp.1m
.xx "on a socket." "" "connect: initiate a connection" "" connect.2
.xx "" "an out-going terminal line" "connection." "dial: establish" dial.3c
.xx "" "accept: accept a" "connection on a socket." "" accept.2
.xx "" "connect: initiate a" "connection on a socket." "" connect.2
.xx "" "acctcon1, acctcon2:" "connect-time accounting." "" acctcon.1m
.xx "" "fsck, dfsck: file system" "consistency check and/" "" fsck.1m
.xx "" "cw, checkcw: prepare" "constant-width text for troff." "" cw.1
.xx "" "mkfs:" "construct a file system." "" mkfs.1m
.xx "" "mkfs512:" "construct a file system." "" mkfs512.1m
.xx "execute command." "xargs:" "construct argument list(s) and" "" xargs.1
.xx "" "nroff/troff, tbl, and eqn" "constructs." "deroff: remove" deroff.1
.xx "" "ls: list" "contents of directories." "" ls.1
.xx "(Berkeley version)." "ls7: list" "contents of directory" "" ls7.1
.xx "" "csplit:" "context split." "" csplit.1
.xx "" "fcntl: file" "control." "" fcntl.2
.xx "" "uucp status inquiry and job" "control." "uustat:" uustat.1c
.xx "" "vc: version" "control." "" vc.1
.xx "" "asa: interpret ASA carriage" "control characters." "" asa.1
.xx "" "ioctl:" "control device." "" ioctl.2
.xx "" "init, telinit: process" "control initialization." "" init.1m
.xx "" "msgctl: message" "control operations." "" msgctl.2
.xx "" "semctl: semaphore" "control operations." "" semctl.2
.xx "" "shmctl: shared memory" "control operations." "" shmctl.2
.xx "" "fcntl: file" "control options." "" fcntl.5
.xx "" "tcp: Internet Transmission" "Control Protocol." "" tcp.5
.xx "interface." "tty:" "controlling terminal" "" tty.7
.xx "terminals." "term:" "conventional names for" "" term.5
.xx "" "units:" "conversion program." "" units.1
.xx "" "dd:" "convert and copy a file." "" dd.1
.xx "English." "number:" "convert Arabic numerals to" "" number.6
.xx "floating-point number." "atof:" "convert ASCII string to" "" atof.3c
.xx "integers and/" "l3tol, ltol3:" "convert between 3-byte" "" l3tol.3c
.xx "and base-64 ASCII/" "a64l, l64a:" "convert between long integer" "" a64l.3c
.xx "" "/gmtime, asctime, tzset:" "convert date and time to/" "" ctime.3c
.xx "to string." "ecvt, fcvt, gcvt:" "convert floating-point number" "" ecvt.3c
.xx "" "scanf, fscanf, sscanf:" "convert formatted input." "" scanf.3s
.xx "" "strtol, atol, atoi:" "convert string to integer." "" strtol.3c
.xx "" "bcd:" "convert to antique media." "" bcd.6
.xx "" "bcopy: interactive block" "copy." "" bcopy.1m
.xx "" "rcp: remote file" "copy" "" rcp.1
.xx "" "uulog, uuname: unix to unix" "copy." "uucp," uucp.1c
.xx "" "System-to-UNIX System file" "copy." "/uupick: public UNIX" uuto.1c
.xx "" "dd: convert and" "copy a file." "" dd.1
.xx "" "cpio:" "copy file archives in and out." "" cpio.1
.xx "access time." "dcopy:" "copy file systems for optimal" "" dcopy.1m
.xx "checking." "volcopy, labelit:" "copy file systems with label" "" volcopy.1m
.xx "" "cp, ln, mv:" "copy, link or move files." "" cp.1
.xx "file." "" "core: format of core image" "" core.4
.xx "" "core: format of" "core image file." "" core.4
.xx "" "mem, kmem:" "core memory." "" mem.7
.xx "atan2: trigonometric/" "sin," "cos, tan, asin, acos, atan," "" trig.3m
.xx "functions." "sinh," "cosh, tanh: hyperbolic" "" sinh.3m
.xx "" "wc: word" "count." "" wc.1
.xx "" "sum7: sum and" "count blocks in a file." "" sum7.1
.xx "in the given/" "sumdir: sum and" "count characters in the files" "" sumdir.1
.xx "" "sum: print checksum and block" "count of a file." "" sum.1
.xx "files." "" "cp, ln, mv: copy, link or move" "" cp.1
.xx "" "cpio: format of" "cpio archive." "" cpio.4
.xx "and out." "" "cpio: copy file archives in" "" cpio.1
.xx "" "" "cpio: format of cpio archive." "" cpio.4
.xx "preprocessor." "" "cpp: the C language" "" cpp.1
.xx "" "sethostname: set name of host" "cpu." "" sethostname.2
.xx "" "clock: report" "CPU time used." "" clock.3c
.xx "" "craps: the game of" "craps." "" craps.6
.xx "" "" "craps: the game of craps." "" craps.6
.xx "system crashes." "" "crash: what to do when the" "" crash.8
.xx "" "what to do when the system" "crashes." "crash:" crash.8
.xx "rewrite an existing one." "" "creat: create a new file or" "" creat.2
.xx "file." "tmpnam, tempnam:" "create a name for a temporary" "" tmpnam.3s
.xx "an existing one." "creat:" "create a new file or rewrite" "" creat.2
.xx "" "fork:" "create a new process." "" fork.2
.xx "" "tmpfile:" "create a temporary file." "" tmpfile.3s
.xx "communication." "socket:" "create an endpoint for" "" socket.2
.xx "by massaging C source." "mkstr:" "create an error message file" "" mkstr.1
.xx "channel." "pipe:" "create an interprocess" "" pipe.2
.xx "files." "admin:" "create and administer SCCS" "" admin.1
.xx "" "umask: set and get file" "creation mask." "" umask.2
.xx "" "cribbage: the card game" "cribbage." "" cribbage.6
.xx "cribbage." "" "cribbage: the card game" "" cribbage.6
.xx "" "" "cron: clock daemon." "" cron.1m
.xx "" "cxref: generate C program" "cross reference." "" cxref.1
.xx "" "more: file perusal filter for" "crt viewing." "" more.1
.xx "" "" "crypt: encode/decode." "" crypt.1
.xx "generate DES encryption." "" "crypt, setkey, encrypt:" "" crypt.3c
.xx "interpreter) with C-like/" "" "csh: a shell (command" "" csh.1
.xx "" "" "csplit: context split." "" csplit.1
.xx "terminal." "" "ct: spawn getty to a remote" "" ct.1c
.xx "for a C program." "" "ctags: maintain a tags file" "" ctags.1
.xx "for terminal." "" "ctermid: generate file name" "" ctermid.3s
.xx "asctime, tzset: convert date/" "" "ctime, localtime, gmtime," "" ctime.3c
.xx "" "" "cu: call another UNIX System." "" cu.1c
.xx "" "ttt," "cubic: tic-tac-toe." "" ttt.6
.xx "" "gethostname: get name of" "current host." "" gethostname.2
.xx "" "hostname: set or print name of" "current host system" "" hostname.1
.xx "activity." "sact: print" "current SCCS file editing" "" sact.1
.xx "" "uname: print name of" "current UNIX System." "" uname.1
.xx "" "uname: get name of" "current UNIX system." "" uname.2
.xx "" "slot in the utmp file of the" "current user." "/find the" ttyslot.3c
.xx "" "getcwd: get pathname of" "current working directory." "" getcwd.3c
.xx "" "spline: interpolate smooth" "curve." "" spline.1g
.xx "name of the user." "" "cuserid: get character login" "" cuserid.3s
.xx "of each line of a file." "" "cut: cut out selected fields" "" cut.1
.xx "each line of a file." "cut:" "cut out selected fields of" "" cut.1
.xx "constant-width text for/" "" "cw, checkcw: prepare" "" cw.1
.xx "cross reference." "" "cxref: generate C program" "" cxref.1
.xx "" "cron: clock" "daemon." "" cron.1m
.xx "" "errdemon: error-logging" "daemon." "" errdemon.1m
.xx "" "terminate the error-logging" "daemon." "errstop:" errstop.1m
.xx "" "runacct: run" "daily accounting." "" runacct.1m
.xx "backup." "filesave, tapesave:" "daily/weekly UNIX file system" "" filesave.1m
.xx "" "/handle special functions of" "DASI 300 and 300s terminals." "" 300.1
.xx "" "special functions of the" "DASI 450 terminal." "/handle" 450.1
.xx "" "blt, blt512: block transfer" "data." "" blt.3
.xx "" "prof: display profile" "data." "" prof.1
.xx "" "/time a command; report process" "data and system activity." "" timex.1
.xx "" "termcap: terminal capability" "data base." "" termcap.5
.xx "port." "ttytype:" "data base of terminal types by" "" ttytype.4
.xx "" "/sgetl: access long numeric" "data in a machine independent/" "" sputl.3x
.xx "" "plock: lock process, text, or" "data in memory." "" plock.2
.xx "call." "stat:" "data returned by stat system" "" stat.5
.xx "" "brk, sbrk: change" "data segment space allocation." "" brk.2
.xx "" "types: primitive system" "data types." "" types.5
.xx "" "join: relational" "database operator." "" join.1
.xx "" "udp: Internet User" "Datagram Protocol." "" udp.5
.xx "" "date: print and set the" "date." "" date.1
.xx "" "/asctime, tzset: convert" "date and time to string." "" ctime.3c
.xx "" "" "date: print and set the date." "" date.1
.xx "" "" "dc: desk calculator." "" dc.1
.xx "optimal access time." "" "dcopy: copy file systems for" "" dcopy.1m
.xx "" "" "dd: convert and copy a file." "" dd.1
.xx "" "adb:" "debugger." "" adb.1
.xx "" "fsdb: file system" "debugger." "" fsdb.1m
.xx "" "eqnchar: special character" "definitions for eqn and neqn." "" eqnchar.5
.xx "" "netmailer:" "deliver mail to." "" netmailer.8
.xx "people." "delivermail:" "deliver mail to arbitrary" "" delivermail.8
.xx "names." "basename, dirname:" "deliver portions of path" "" basename.1
.xx "file." "tail:" "deliver the last part of a" "" tail.1
.xx "" "aliases: aliases file for" "delivermail." "" aliases.7
.xx "arbitrary people." "" "delivermail: deliver mail to" "" delivermail.8
.xx "" "delta commentary of an SCCS" "delta." "cdc: change the" cdc.1
.xx "file." "delta: make a" "delta (change) to an SCCS" "" delta.1
.xx "delta." "cdc: change the" "delta commentary of an SCCS" "" cdc.1
.xx "" "rmdel: remove a" "delta from an SCCS file." "" rmdel.1
.xx "to an SCCS file." "" "delta: make a delta (change)" "" delta.1
.xx "" "comb: combine SCCS" "deltas." "" comb.1
.xx "" "mesg: permit or" "deny messages." "" mesg.1
.xx "tbl, and eqn constructs." "" "deroff: remove nroff/troff," "" deroff.1
.xx "" "setkey, encrypt: generate" "DES encryption." "crypt," crypt.3c
.xx "" "close: close a file" "descriptor." "" close.2
.xx "" "dup: duplicate an open file" "descriptor." "" dup.2
.xx "" "dc:" "desk calculator." "" dc.1
.xx "file." "access:" "determine accessibility of a" "" access.2
.xx "" "file:" "determine file type." "" file.1
.xx "" "errors in the specified" "device." "/on/off the extended" exterr.1
.xx "" "ioctl: control" "device." "" ioctl.2
.xx "" "master: master" "device information table." "" master.4
.xx "" "devnm:" "device name." "" devnm.1m
.xx "" "" "devnm: device name." "" devnm.1m
.xx "blocks." "" "df: report number of free disk" "" df.1m
.xx "check and interactive/" "fsck," "dfsck: file system consistency" "" fsck.1m
.xx "terminal line connection." "" "dial: establish an out-going" "" dial.3c
.xx "" "bdiff: big" "diff." "" bdiff.1
.xx "comparator." "" "diff: differential file" "" diff.1
.xx "comparison." "" "diff3: 3-way differential file" "" diff3.1
.xx "" "sdiff: side-by-side" "difference program." "" sdiff.1
.xx "" "diffmk: mark" "differences between files." "" diffmk.1
.xx "" "diff:" "differential file comparator." "" diff.1
.xx "" "diff3: 3-way" "differential file comparison." "" diff3.1
.xx "between files." "" "diffmk: mark differences" "" diffmk.1
.xx "" "" "dir: format of directories." "" dir.4
.xx "" "" "dircmp: directory comparison." "" dircmp.1
.xx "" "dir: format of" "directories." "" dir.4
.xx "" "ls: list contents of" "directories." "" ls.1
.xx "" "rm, rmdir: remove files or" "directories." "" rm.1
.xx "" "in the files in the given" "directories." "/count characters" sumdir.1
.xx "" "cd: change working" "directory." "" cd.1
.xx "" "chdir: change working" "directory." "" chdir.2
.xx "" "chroot: change root" "directory." "" chroot.2
.xx "" "pathname of current working" "directory." "getcwd: get" getcwd.3c
.xx "" "mkdir: make a" "directory." "" mkdir.1
.xx "" "mvdir: move a" "directory." "" mvdir.1m
.xx "" "ls7: list contents of" "directory (Berkeley version)." "" ls7.1
.xx "" "uuclean: uucp spool" "directory clean-up." "" uuclean.1m
.xx "" "dircmp:" "directory comparison." "" dircmp.1
.xx "" "unlink: remove" "directory entry." "" unlink.2
.xx "" "chroot: change root" "directory for a command." "" chroot.1m
.xx "" "/make a lost+found" "directory for fsck." "" mklost+fnd.1m
.xx "" "pwd: working" "directory name." "" pwd.1
.xx "ordinary file." "mknod: make a" "directory, or a special or" "" mknod.2
.xx "path names." "basename," "dirname: deliver portions of" "" basename.1
.xx "printers." "enable," "disable: enable/disable LP" "" enable.1
.xx "" "acct: enable or" "disable process accounting." "" acct.2
.xx "" "type, modes, speed, and line" "discipline." "/set terminal" getty.1m
.xx "" "diskformat - format a" "disk." "" diskformat.1m
.xx "" "sadp:" "disk access profiler." "" sadp.1
.xx "" "df: report number of free" "disk blocks." "" df.1m
.xx "" "disktune - tune floppy" "disk settling time parameters." "" disktune.1m
.xx "" "du: summarize" "disk usage." "" du.1
.xx "" "" "diskformat - format a disk." "" diskformat.1m
.xx "settling time parameters." "" "disktune - tune floppy disk" "" disktune.1m
.xx "" "mount, umount: mount and" "dismount file system." "" mount.1m
.xx "" "rain: animated raindrops" "display." "" rain.6
.xx "" "/view: screen oriented (visual)" "display editor based on ex." "" vi.1
.xx "" "prof:" "display profile data." "" prof.1
.xx "" "worms: animate worms on a" "display terminal." "" worms.6
.xx "" "hypot: Euclidean" "distance function." "" hypot.3m
.xx "" "/lcong48: generate uniformly" "distributed pseudo-random/" "" drand48.3c
.xx "" "macro package for formatting" "documents." "mm: the MM" mm.5
.xx "" "macro package for formatting" "documents." "/the OSDD adapter" mosd.5
.xx "" "mm, osdd, checkmm: print/check" "documents formatted with the/" "" mm.1
.xx "slides." "mmt, mvt: typeset" "documents, view graphs, and" "" mmt.1
.xx "nulladm,/" "chargefee, ckpacct," "dodisk, lastlogin, monacct," "" acctsh.1m
.xx "" "whodo: who is" "doing what." "" whodo.1m
.xx "" "suitable for Motorola S-record" "downloading." "/ASCII formats" hex.1
.xx "" "/Motorola S-records from" "downloading into a file." "" rcvhex.1
.xx "nrand48, mrand48, jrand48,/" "" "drand48, erand48, lrand48," "" drand48.3c
.xx "" "arithmetic: provide" "drill in number facts." "" arithmetic.6
.xx "" "" "du: summarize disk usage." "" du.1
.xx "" "extract error records from" "dump." "errdead:" errdead.1m
.xx "" "od: octal" "dump." "" od.1
.xx "an object file." "" "dump: dump selected parts of" "" dump.1
.xx "object file." "dump:" "dump selected parts of an" "" dump.1
.xx "descriptor." "" "dup: duplicate an open file" "" dup.2
.xx "descriptor." "dup:" "duplicate an open file" "" dup.2
.xx "" "The alien invaders attack the" "earth." "aliens:" aliens.6
.xx "" "echo:" "echo arguments." "" echo.1
.xx "" "" "echo: echo arguments." "" echo.1
.xx "floating-point number to/" "" "ecvt, fcvt, gcvt: convert" "" ecvt.3c
.xx "" "" "ed, red: text editor." "" ed.1
.xx "program." "end, etext," "edata: last locations in" "" end.3c
.xx "" "ex," "edit: text editor" "" ex.1
.xx "" "sact: print current SCCS file" "editing activity." "" sact.1
.xx "" "ed, red: text" "editor." "" ed.1
.xx "" "ex, edit: text" "editor" "" ex.1
.xx "" "ld: link" "editor." "" ld.1
.xx "" "sed: stream" "editor." "" sed.1
.xx "" "oriented (visual) display" "editor based on ex." "/screen" vi.1
.xx "" "se: screen" "editor for video terminals." "" se.1
.xx "" "a.out: assembler and link" "editor output." "" a.out.4
.xx "" "/user, real group, and" "effective group IDs." "" getuid.2
.xx "and/" "/getegid: get real user," "effective user, real group," "" getuid.2
.xx "Language." "" "ef\^l: Extended Fortran" "" efl.1
.xx "" "split fortran, ratfor, or" "ef\^l files." "fsplit:" fsplit.1
.xx "for a pattern." "grep," "egrep, fgrep: search a file" "" grep.1
.xx "enable/disable LP printers." "" "enable, disable:" "" enable.1
.xx "accounting." "acct:" "enable or disable process" "" acct.2
.xx "" "enable, disable:" "enable/disable LP printers." "" enable.1
.xx "" "crypt:" "encode/decode." "" crypt.1
.xx "encryption." "crypt, setkey," "encrypt: generate DES" "" crypt.3c
.xx "" "setkey, encrypt: generate DES" "encryption." "crypt," crypt.3c
.xx "" "makekey: generate" "encryption key." "" makekey.1
.xx "locations in program." "" "end, etext, edata: last" "" end.3c
.xx "" "/getgrgid, getgrnam, setgrent," "endgrent: get group file/" "" getgrent.3c
.xx "" "socket: create an" "endpoint for communication." "" socket.2
.xx "" "/getpwuid, getpwnam, setpwent," "endpwent: get password file/" "" getpwent.3c
.xx "utmp/" "/pututline, setutent," "endutent, utmpname: access" "" getut.3c
.xx "" "convert Arabic numerals to" "English." "number:" number.6
.xx "" "nlist: get" "entries from name list." "" nlist.3c
.xx "" "man, manprog: print" "entries in this manual." "" man.1
.xx "" "man: macros for formatting" "entries in this manual." "" man.5
.xx "" "endgrent: get group file" "entry." "/getgrnam, setgrent," getgrent.3c
.xx "" "endpwent: get password file" "entry." "/getpwnam, setpwent," getpwent.3c
.xx "" "utmpname: access utmp file" "entry." "/setutent, endutent," getut.3c
.xx "" "putpwent: write password file" "entry." "" putpwent.3c
.xx "" "unlink: remove directory" "entry." "" unlink.2
.xx "" "utmp, wtmp: utmp and wtmp" "entry formats." "" utmp.4
.xx "command execution." "" "env: set environment for" "" env.1
.xx "" "" "environ: user environment." "" environ.4
.xx "" "" "environ: user environment." "" environ.5
.xx "" "environ: user" "environment." "" environ.4
.xx "" "environ: user" "environment." "" environ.5
.xx "" "printenv: print out the" "environment." "" printenv.1
.xx "" "profile: setting up an" "environment at login time." "" profile.4
.xx "execution." "env: set" "environment for command" "" env.1
.xx "" "getenv: return value for" "environment name." "" getenv.3c
.xx "" "character definitions for" "eqn and neqn." "/special" eqnchar.5
.xx "" "remove nroff/troff, tbl, and" "eqn constructs." "deroff:" deroff.1
.xx "mathematical text for nroff/" "" "eqn, neqn, checkeq: format" "" eqn.1
.xx "definitions for eqn and neqn." "" "eqnchar: special character" "" eqnchar.5
.xx "mrand48, jrand48,/" "drand48," "erand48, lrand48, nrand48," "" drand48.3c
.xx "complementary error function." "" "erf, erfc: error function and" "" erf.3m
.xx "complementary error/" "erf," "erfc: error function and" "" erf.3m
.xx "" "" "err: error-logging interface." "" err.7
.xx "from dump." "" "errdead: extract error records" "" errdead.1m
.xx "daemon." "" "errdemon: error-logging" "" errdemon.1m
.xx "format." "" "errfile: error-log file" "" errfile.4
.xx "system error/" "perror," "errno, sys_errlist, sys_nerr:" "" perror.3c
.xx "" "function and complementary" "error function." "/erfc: error" erf.3m
.xx "complementary/" "erf, erfc:" "error function and" "" erf.3m
.xx "massaging C/" "mkstr: create an" "error message file by" "" mkstr.1
.xx "" "sys_errlist, sys_nerr: system" "error messages." "/errno," perror.3c
.xx "" "to system calls and" "error numbers." "/introduction" intro.2
.xx "" "errdead: extract" "error records from dump." "" errdead.1m
.xx "" "matherr:" "error-handling function." "" matherr.3m
.xx "" "errfile:" "error-log file format." "" errfile.4
.xx "" "errdemon:" "error-logging daemon." "" errdemon.1m
.xx "" "errstop: terminate the" "error-logging daemon." "" errstop.1m
.xx "" "err:" "error-logging interface." "" err.7
.xx "" "process a report of logged" "errors." "errpt:" errpt.1m
.xx "" "hashcheck: find spelling" "errors." "/hashmake, spellin," spell.1
.xx "" "/- turn on/off the extended" "errors in the specified/" "" exterr.1
.xx "logged errors." "" "errpt: process a report of" "" errpt.1m
.xx "error-logging daemon." "" "errstop: terminate the" "" errstop.1m
.xx "robots." "autorobots:" "Escape from the automatic" "" autorobots.6
.xx "" "robots:" "Escape from the robots." "" robots.6
.xx "" "chase: Try to" "escape the killer robots." "" chase.6
.xx "terminal line/" "dial:" "establish an out-going" "" dial.3c
.xx "" "setmnt:" "establish mount table." "" setmnt.1m
.xx "bnet." "" "/etc/hosts: host table for" "" hosts.7
.xx "in program." "end," "etext, edata: last locations" "" end.3c
.xx "" "hypot:" "Euclidean distance function." "" hypot.3m
.xx "expression." "expr:" "evaluate arguments as an" "" expr.1
.xx "" "test: condition" "evaluation command." "" test.1
.xx "" "display editor based on" "ex." "/screen oriented (visual)" vi.1
.xx "" "" "ex, edit: text editor" "" ex.1
.xx "reading or/" "lockf: provide" "exclusive file regions for" "" lockf.2
.xx "execlp, execvp: execute a/" "" "execl, execv, execle, execve," "" exec.2
.xx "execvp: execute/" "execl, execv," "execle, execve, execlp," "" exec.2
.xx "" "execl, execv, execle, execve," "execlp, execvp: execute a/" "" exec.2
.xx "" "execve, execlp, execvp:" "execute a file." "/execle," exec.2
.xx "" "construct argument list(s) and" "execute command." "xargs:" xargs.1
.xx "time." "at:" "execute commands at a later" "" at.1
.xx "" "regcmp, regex: compile and" "execute regular expression." "" regcmp.3x
.xx "" "set environment for command" "execution." "env:" env.1
.xx "" "uux: unix to unix command" "execution." "" uux.1c
.xx "" "sleep: suspend" "execution for an interval." "" sleep.1
.xx "" "sleep: suspend" "execution for interval." "" sleep.3c
.xx "" "monitor: prepare" "execution profile." "" monitor.3c
.xx "" "profil:" "execution time profile." "" profil.2
.xx "execvp: execute a/" "execl," "execv, execle, execve, execlp," "" exec.2
.xx "execute/" "execl, execv, execle," "execve, execlp, execvp:" "" exec.2
.xx "" "/execv, execle, execve, execlp," "execvp: execute a file." "" exec.2
.xx "system calls." "link, unlink:" "exercise link and unlink" "" link.1m
.xx "" "a new file or rewrite an" "existing one." "creat: create" creat.2
.xx "process." "" "exit, _exit: terminate" "" exit.2
.xx "" "exit," "_exit: terminate process." "" exit.2
.xx "exponential, logarithm,/" "" "exp, log, log10, pow, sqrt:" "" exp.3m
.xx "" "pcat, unpack: compress and" "expand files." "pack," pack.1
.xx "" "adventure: an" "exploration game." "" adventure.6
.xx "" "exp, log, log10, pow, sqrt:" "exponential, logarithm, power,/" "" exp.3m
.xx "expression." "" "expr: evaluate arguments as an" "" expr.1
.xx "" "expr: evaluate arguments as an" "expression." "" expr.1
.xx "" "compile and execute regular" "expression." "regcmp, regex:" regcmp.3x
.xx "" "regcmp: regular" "expression compile." "" regcmp.1
.xx "routines." "regexp: regular" "expression compile and match" "" regexp.5
.xx "" "exterr - turn on/off the" "extended errors in the/" "" exterr.1
.xx "" "ef\^l:" "Extended Fortran Language." "" efl.1
.xx "" "greek: graphics for the" "extended TTY-37 type-box." "" greek.5
.xx "extended errors in the/" "" "exterr - turn on/off the" "" exterr.1
.xx "dump." "errdead:" "extract error records from" "" errdead.1m
.xx "remainder,/" "floor, ceil, fmod," "fabs: floor, ceiling," "" floor.3m
.xx "" "factor:" "factor a number." "" factor.1
.xx "" "" "factor: factor a number." "" factor.1
.xx "" "true," "false: provide truth values." "" true.1
.xx "" "data in a machine independent" "fashion.." "/access long numeric" sputl.3x
.xx "" "finc:" "fast incremental backup." "" finc.1m
.xx "" "abort: generate an IOT" "fault." "" abort.3c
.xx "a stream." "" "fclose, fflush: close or flush" "" fclose.3s
.xx "" "" "fcntl: file control." "" fcntl.2
.xx "" "" "fcntl: file control options." "" fcntl.5
.xx "floating-point number/" "ecvt," "fcvt, gcvt: convert" "" ecvt.3c
.xx "" "fopen, freopen," "fdopen: open a stream." "" fopen.3s
.xx "status inquiries." "ferror," "feof, clearerr, fileno: stream" "" ferror.3s
.xx "fileno: stream status/" "" "ferror, feof, clearerr," "" ferror.3s
.xx "statistics for a file system." "" "f\&f: list file names and" "" ff.1m
.xx "stream." "fclose," "fflush: close or flush a" "" fclose.3s
.xx "word from/" "getc, getchar," "fgetc, getw: get character or" "" getc.3s
.xx "stream." "gets," "fgets: get a string from a" "" gets.3s
.xx "pattern." "grep, egrep," "fgrep: search a file for a" "" grep.1
.xx "" "determine accessibility of a" "file." "access:" access.2
.xx "" "chmod: change mode of" "file." "" chmod.2
.xx "" "change owner and group of a" "file." "chown:" chown.2
.xx "" "core: format of core image" "file." "" core.4
.xx "" "fields of each line of a" "file." "cut: cut out selected" cut.1
.xx "" "dd: convert and copy a" "file." "" dd.1
.xx "" "a delta (change) to an SCCS" "file." "delta: make" delta.1
.xx "" "selected parts of an object" "file." "dump: dump" dump.1
.xx "" "execlp, execvp: execute a" "file." "/execv, execle, execve," exec.2
.xx "" "on character frequencies in a" "file." "freq: report" freq.1
.xx "" "get: get a version of an SCCS" "file." "" get.1
.xx "" "group: group" "file." "" group.4
.xx "" "issue: issue identification" "file." "" issue.4
.xx "" "link: link to a" "file." "" link.2
.xx "" "mknod: build special" "file." "" mknod.1m
.xx "" "or a special or ordinary" "file." "/make a directory," mknod.2
.xx "" "change the format of a text" "file." "newform:" newform.1
.xx "" "null: the null" "file." "" null.7
.xx "" "passwd: password" "file." "" passwd.4
.xx "" "or subsequent lines of one" "file." "/lines of several files" paste.1
.xx "" "prs: print an SCCS" "file." "" prs.1
.xx "" "from downloading into a" "file." "/Motorola S-records" rcvhex.1
.xx "" "read: read from" "file." "" read.2
.xx "" "remove a delta from an SCCS" "file." "rmdel:" rmdel.1
.xx "" "two versions of an SCCS" "file." "sccsdiff: compare" sccsdiff.1
.xx "" "sccsfile: format of SCCS" "file." "" sccsfile.4
.xx "" "size: size of an object" "file." "" size.1
.xx "" "in an object, or other binary" "file." "/the printable strings" strings.1
.xx "" "checksum and block count of a" "file." "sum: print" sum.1
.xx "" "sum and count blocks in a" "file." "sum7:" sum7.1
.xx "" "deliver the last part of a" "file." "tail:" tail.1
.xx "" "tmpfile: create a temporary" "file." "" tmpfile.3s
.xx "" "create a name for a temporary" "file." "tmpnam, tempnam:" tmpnam.3s
.xx "" "and modification times of a" "file." "touch: update access" touch.1
.xx "" "undo a previous get of an SCCS" "file." "unget:" unget.1
.xx "" "report repeated lines in a" "file." "uniq:" uniq.1
.xx "" "val: validate SCCS" "file." "" val.1
.xx "" "write: write on a" "file." "" write.2
.xx "times." "utime: set" "file access and modification" "" utime.2
.xx "" "hpio: HP 2645A terminal tape" "file archiver." "" hpio.1
.xx "" "tar: tape" "file archiver." "" tar.1
.xx "" "cpio: copy" "file archives in and out." "" cpio.1
.xx "" "mkstr: create an error message" "file by massaging C source." "" mkstr.1
.xx "" "pwck, grpck: password/group" "file checkers." "" pwck.1m
.xx "" "diff: differential" "file comparator." "" diff.1
.xx "" "diff3: 3-way differential" "file comparison." "" diff3.1
.xx "" "fcntl:" "file control." "" fcntl.2
.xx "" "fcntl:" "file control options." "" fcntl.5
.xx "" "rcp: remote" "file copy" "" rcp.1
.xx "" "UNIX System-to-UNIX System" "file copy." "/uupick: public" uuto.1c
.xx "" "umask: set and get" "file creation mask." "" umask.2
.xx "" "close: close a" "file descriptor." "" close.2
.xx "" "dup: duplicate an open" "file descriptor." "" dup.2
.xx "" "" "file: determine file type." "" file.1
.xx "" "sact: print current SCCS" "file editing activity." "" sact.1
.xx "" "setgrent, endgrent: get group" "file entry." "/getgrnam," getgrent.3c
.xx "" "endpwent: get password" "file entry." "/setpwent," getpwent.3c
.xx "" "utmpname: access utmp" "file entry." "/endutent," getut.3c
.xx "" "putpwent: write password" "file entry." "" putpwent.3c
.xx "" "ctags: maintain a tags" "file for a C program." "" ctags.1
.xx "" "grep, egrep, fgrep: search a" "file for a pattern." "" grep.1
.xx "" "aliases: aliases" "file for delivermail." "" aliases.7
.xx "" "acct: per-process accounting" "file format." "" acct.4
.xx "" "ar: archive (library)" "file format." "" ar.4
.xx "" "errfile: error-log" "file format." "" errfile.4
.xx "" "pnch:" "file format for card images." "" pnch.4
.xx "" "intro: introduction to" "file formats." "" intro.4
.xx "" "take: takes a" "file from a remote machine." "" take.1c
.xx "" "take7: takes a" "file from a remote machine.." "" take7.1c
.xx "" "see: see what a" "file has in it." "" see.1
.xx "" "split: split a" "file into pieces." "" split.1
.xx "" "mktemp: make a unique" "file name." "" mktemp.3c
.xx "" "ctermid: generate" "file name for terminal." "" ctermid.3s
.xx "a file system." "f\&f: list" "file names and statistics for" "" ff.1m
.xx "" "/find the slot in the utmp" "file of the current user." "" ttyslot.3c
.xx "" "put: puts a" "file onto a remote machine.." "" put.1c
.xx "" "put7: puts a" "file onto a remote machine.." "" put7.1c
.xx "" "/identify processes using a" "file or file structure." "" fuser.1m
.xx "one." "creat: create a new" "file or rewrite an existing" "" creat.2
.xx "viewing." "more:" "file perusal filter for crt" "" more.1
.xx "" "lseek: move read/write" "file pointer." "" lseek.2
.xx "" "/rewind, ftell: reposition a" "file pointer in a stream." "" fseek.3s
.xx "" "lockf: provide exclusive" "file regions for reading or/" "" lockf.2
.xx "" "bfs: big" "file scanner." "" bfs.1
.xx "" "stat, fstat: get" "file status." "" stat.2
.xx "" "processes using a file or" "file structure." "/identify" fuser.1m
.xx "" "names and statistics for a" "file system." "f\&f: list file" ff.1m
.xx "" "mkfs: construct a" "file system." "" mkfs.1m
.xx "" "mkfs512: construct a" "file system." "" mkfs512.1m
.xx "" "umount: mount and dismount" "file system." "mount," mount.1m
.xx "" "mount: mount a" "file system." "" mount.2
.xx "" "umount: unmount a" "file system." "" umount.2
.xx "" "tapesave: daily/weekly UNIX" "file system backup." "filesave," filesave.1m
.xx "and interactive/" "fsck, dfsck:" "file system consistency check" "" fsck.1m
.xx "" "fsdb:" "file system debugger." "" fsdb.1m
.xx "volume." "" "file system: format of system" "" fs.4
.xx "" "ustat: get" "file system statistics." "" ustat.2
.xx "" "mnttab: mounted" "file system table." "" mnttab.4
.xx "access time." "dcopy: copy" "file systems for optimal" "" dcopy.1m
.xx "fsck." "checklist: list of" "file systems processed by" "" checklist.4
.xx "" "volcopy, labelit: copy" "file systems with label/" "" volcopy.1m
.xx "" "ftw: walk a" "file tree." "" ftw.3c
.xx "" "file: determine" "file type." "" file.1
.xx "" "umask: set" "file-creation mode mask." "" umask.1
.xx "" "ferror, feof, clearerr," "fileno: stream status/" "" ferror.3s
.xx "" "and print process accounting" "file(s)." "acctcom: search" acctcom.1
.xx "" "merge or add total accounting" "files." "acctmerg:" acctmerg.1m
.xx "" "create and administer SCCS" "files." "admin:" admin.1
.xx "" "cat: concatenate and print" "files." "" cat.1
.xx "" "cmp: compare two" "files." "" cmp.1
.xx "" "lines common to two sorted" "files." "comm: select or reject" comm.1
.xx "" "cp, ln, mv: copy, link or move" "files." "" cp.1
.xx "" "mark differences between" "files." "diffmk:" diffmk.1
.xx "" "find: find" "files." "" find.1
.xx "" "format specification in text" "files." "fspec:" fspec.4
.xx "" "fortran, ratfor, or ef\^l" "files." "fsplit: split" fsplit.1
.xx "" "string, format of graphical" "files." "/graphical primitive" gps.4
.xx "" "intro: introduction to special" "files." "" intro.7
.xx "" "unpack: compress and expand" "files." "pack, pcat," pack.1
.xx "" "pr: print" "files." "" pr.1
.xx "" "sort: sort and/or merge" "files." "" sort.1
.xx "" "reports version number of" "files." "version:" version.1
.xx "" "what: identify SCCS" "files." "" what.1
.xx "" "updater: update" "files between two machines." "" updater.1
.xx "" "updater: update" "files between two machines." "" updater.1m
.xx "" "frec: recover" "files from a backup tape." "" frec.1m
.xx "" "and count characters in the" "files in the given/" "/sum" sumdir.1
.xx "" "hex: translates object" "files into ASCII formats/" "" hex.1
.xx "" "rm, rmdir: remove" "files or directories." "" rm.1
.xx "" "/merge same lines of several" "files or subsequent lines of/" "" paste.1
.xx "daily/weekly UNIX file system/" "" "filesave, tapesave:" "" filesave.1m
.xx "" "greek: select terminal" "filter." "" greek.1
.xx "" "nl: line numbering" "filter." "" nl.1
.xx "" "more: file perusal" "filter for crt viewing." "" more.1
.xx "" "col:" "filter reverse line-feeds." "" col.1
.xx "" "tplot: graphics" "filters." "" tplot.1g
.xx "" "" "finc: fast incremental backup." "" finc.1m
.xx "" "find:" "find files." "" find.1
.xx "" "" "find: find files." "" find.1
.xx "" "hyphen:" "find hyphenated words." "" hyphen.1
.xx "" "ttyname, isatty:" "find name of a terminal." "" ttyname.3c
.xx "object library." "lorder:" "find ordering relation for an" "" lorder.1
.xx "" "hashmake, spellin, hashcheck:" "find spelling errors." "spell," spell.1
.xx "an object, or other/" "strings:" "find the printable strings in" "" strings.1
.xx "of the current user." "ttyslot:" "find the slot in the utmp file" "" ttyslot.3c
.xx "" "fish: play ``Go" "Fish''." "" fish.6
.xx "" "" "fish: play ``Go Fish''." "" fish.6
.xx "" "a command immune to hangups" "(\fIsh\^\fR only)." "nohup: run" nohup.1
.xx "" "tee: pipe" "fitting." "" tee.1
.xx "" "atof: convert ASCII string to" "floating-point number." "" atof.3c
.xx "" "ecvt, fcvt, gcvt: convert" "floating-point number to/" "" ecvt.3c
.xx "" "/modf: manipulate parts of" "floating-point numbers." "" frexp.3c
.xx "floor, ceiling, remainder,/" "" "floor, ceil, fmod, fabs:" "" floor.3m
.xx "" "floor, ceil, fmod, fabs:" "floor, ceiling, remainder,/" "" floor.3m
.xx "parameters." "disktune - tune" "floppy disk settling time" "" disktune.1m
.xx "" "cflow: generate C" "flow graph." "" cflow.1
.xx "" "fclose, fflush: close or" "flush a stream." "" fclose.3s
.xx "remainder,/" "floor, ceil," "fmod, fabs: floor, ceiling," "" floor.3m
.xx "stream." "" "fopen, freopen, fdopen: open a" "" fopen.3s
.xx "" "" "fork: create a new process." "" fork.2
.xx "" "per-process accounting file" "format." "acct:" acct.4
.xx "" "ar: archive (library) file" "format." "" ar.4
.xx "" "errfile: error-log file" "format." "" errfile.4
.xx "" "tp: magnetic tape" "format." "" tp.4
.xx "" "diskformat -" "format a disk." "" diskformat.1m
.xx "" "pnch: file" "format for card images." "" pnch.4
.xx "nroff or/" "eqn, neqn, checkeq:" "format mathematical text for" "" eqn.1
.xx "" "newform: change the" "format of a text file." "" newform.1
.xx "" "inode:" "format of an inode." "" inode.4
.xx "" "core:" "format of core image file." "" core.4
.xx "" "cpio:" "format of cpio archive." "" cpio.4
.xx "" "dir:" "format of directories." "" dir.4
.xx "" "/graphical primitive string," "format of graphical files." "" gps.4
.xx "" "sccsfile:" "format of SCCS file." "" sccsfile.4
.xx "" "file system:" "format of system volume." "" fs.4
.xx "files." "fspec:" "format specification in text" "" fspec.4
.xx "troff." "tbl:" "format tables for nroff or" "" tbl.1
.xx "" "nroff:" "format text." "" nroff.1
.xx "" "intro: introduction to file" "formats." "" intro.4
.xx "" "wtmp: utmp and wtmp entry" "formats." "utmp," utmp.4
.xx "" "/object files into ASCII" "formats suitable for Motorola/" "" hex.1
.xx "" "scanf, fscanf, sscanf: convert" "formatted input." "" scanf.3s
.xx "" "fprintf, sprintf: print" "formatted output." "printf," printf.3s
.xx "" "/checkmm: print/check documents" "formatted with the MM macros." "" mm.1
.xx "" "mptx: the macro package for" "formatting a permuted index." "" mptx.5
.xx "" "nroff7: text" "formatting and typesetting." "" nroff7.1
.xx "" "troff7: text" "formatting and typesetting." "" troff7.1
.xx "" "mm: the MM macro package for" "formatting documents." "" mm.5
.xx "" "OSDD adapter macro package for" "formatting documents." "/the" mosd.5
.xx "manual." "man: macros for" "formatting entries in this" "" man.5
.xx "" "fortran:" "FORTRAN compiler." "" fortran.1
.xx "" "" "fortran: FORTRAN compiler." "" fortran.1
.xx "" "ef\^l: Extended" "Fortran Language." "" efl.1
.xx "files." "fsplit: split" "fortran, ratfor, or ef\^l" "" fsplit.1
.xx "hopefully interesting, adage." "" "fortune: print a random," "" fortune.6
.xx "formatted output." "printf," "fprintf, sprintf: print" "" printf.3s
.xx "word on a/" "putc, putchar," "fputc, putw: put character or" "" putc.3s
.xx "stream." "puts," "fputs: put a string on a" "" puts.3s
.xx "input/output." "" "fread, fwrite: binary" "" fread.3s
.xx "backup tape." "" "frec: recover files from a" "" frec.1m
.xx "" "df: report number of" "free disk blocks." "" df.1m
.xx "memory allocator." "malloc," "free, realloc, calloc: main" "" malloc.3c
.xx "stream." "fopen," "freopen, fdopen: open a" "" fopen.3s
.xx "frequencies in a file." "" "freq: report on character" "" freq.1
.xx "" "freq: report on character" "frequencies in a file." "" freq.1
.xx "parts of floating-point/" "" "frexp, ldexp, modf: manipulate" "" frexp.3c
.xx "" "frec: recover files" "from a backup tape." "" frec.1m
.xx "" "take: takes a file" "from a remote machine." "" take.1c
.xx "" "take7: takes a file" "from a remote machine.." "" take7.1c
.xx "" "receive: receive message" "from a socket." "" receive.2
.xx "" "send: send message" "from a socket." "" send.2
.xx "" "gets, fgets: get a string" "from a stream." "" gets.3s
.xx "" "rmdel: remove a delta" "from an SCCS file." "" rmdel.1
.xx "" "getopt: get option letter" "from argument vector." "" getopt.3c
.xx "" "/translates Motorola S-records" "from downloading into a file." "" rcvhex.1
.xx "" "errdead: extract error records" "from dump." "" errdead.1m
.xx "" "read: read" "from file." "" read.2
.xx "" "ncheck: generate names" "from i-numbers." "" ncheck.1m
.xx "" "nlist: get entries" "from name list." "" nlist.3c
.xx "" "acctcms: command summary" "from per-process accounting/" "" acctcms.1m
.xx "" "getw: get character or word" "from stream." "/getchar, fgetc," getc.3s
.xx "" "autorobots: Escape" "from the automatic robots." "" autorobots.6
.xx "" "robots: Escape" "from the robots." "" robots.6
.xx "" "getpw: get name" "from UID." "" getpw.3c
.xx "formatted input." "scanf," "fscanf, sscanf: convert" "" scanf.3s
.xx "" "of file systems processed by" "fsck." "checklist: list" checklist.4
.xx "" "a lost+found directory for" "fsck." "mklost+found: make" mklost+fnd.1m
.xx "consistency check and/" "" "fsck, dfsck: file system" "" fsck.1m
.xx "" "" "fsdb: file system debugger." "" fsdb.1m
.xx "reposition a file pointer in/" "" "fseek, rewind, ftell:" "" fseek.3s
.xx "text files." "" "fspec: format specification in" "" fspec.4
.xx "or ef\^l files." "" "fsplit: split fortran, ratfor," "" fsplit.1
.xx "" "stat," "fstat: get file status." "" stat.2
.xx "pointer in a/" "fseek, rewind," "ftell: reposition a file" "" fseek.3s
.xx "" "" "ftw: walk a file tree." "" ftw.3c
.xx "" "and complementary error" "function." "/error function" erf.3m
.xx "" "gamma: log gamma" "function." "" gamma.3m
.xx "" "hypot: Euclidean distance" "function." "" hypot.3m
.xx "" "matherr: error-handling" "function." "" matherr.3m
.xx "error/" "erf, erfc: error" "function and complementary" "" erf.3m
.xx "" "j0, j1, jn, y0, y1, yn: Bessel" "functions." "" bessel.3m
.xx "" "logarithm, power, square root" "functions." "/sqrt: exponential," exp.3m
.xx "" "remainder, absolute value" "functions." "/floor, ceiling," floor.3m
.xx "" "sinh, cosh, tanh: hyperbolic" "functions." "" sinh.3m
.xx "" "atan, atan2: trigonometric" "functions." "/tan, asin, acos," trig.3m
.xx "" "300, 300s: handle special" "functions of DASI 300 and 300s/" "" 300.1
.xx "" "hp: handle special" "functions of HP 2640 and/" "" hp.1
.xx "terminal." "450: handle special" "functions of the DASI 450" "" 450.1
.xx "using a file or file/" "" "fuser: identify processes" "" fuser.1m
.xx "" "fread," "fwrite: binary input/output." "" fread.3s
.xx "connect accounting records." "" "fwtmp, wtmpfix: manipulate" "" fwtmp.1m
.xx "" "adventure: an exploration" "game." "" adventure.6
.xx "" "moo: guessing" "game." "" moo.6
.xx "" "trek: trekkie" "game." "" trek.6
.xx "" "worm: Play the growing worm" "game." "" worm.6
.xx "" "cribbage: the card" "game cribbage." "" cribbage.6
.xx "" "back: the" "game of backgammon." "" back.6
.xx "" "bj: the" "game of black jack." "" bj.6
.xx "" "craps: the" "game of craps." "" craps.6
.xx "" "wump: the" "game of hunt-the-wumpus." "" wump.6
.xx "" "life: play the" "game of life." "" life.6
.xx "" "intro: introduction to" "games." "" intro.6
.xx "" "gamma: log" "gamma function." "" gamma.3m
.xx "" "" "gamma: log gamma function." "" gamma.3m
.xx "number to string." "ecvt, fcvt," "gcvt: convert floating-point" "" ecvt.3c
.xx "" "maze:" "generate a maze." "" maze.6
.xx "" "abort:" "generate an IOT fault." "" abort.3c
.xx "" "cflow:" "generate C flow graph." "" cflow.1
.xx "reference." "cxref:" "generate C program cross" "" cxref.1
.xx "" "crypt, setkey, encrypt:" "generate DES encryption." "" crypt.3c
.xx "" "makekey:" "generate encryption key." "" makekey.1
.xx "terminal." "ctermid:" "generate file name for" "" ctermid.3s
.xx "" "ncheck:" "generate names from i-numbers." "" ncheck.1m
.xx "lexical tasks." "lex:" "generate programs for simple" "" lex.1
.xx "" "/srand48, seed48, lcong48:" "generate uniformly distributed/" "" drand48.3c
.xx "" "srand: simple random-number" "generator." "rand," rand.3c
.xx "" "gets, fgets:" "get a string from a stream." "" gets.3s
.xx "" "get:" "get a version of an SCCS file." "" get.1
.xx "" "ulimit:" "get and set user limits." "" ulimit.2
.xx "the user." "cuserid:" "get character login name of" "" cuserid.3s
.xx "" "getc, getchar, fgetc, getw:" "get character or word from/" "" getc.3s
.xx "" "nlist:" "get entries from name list." "" nlist.3c
.xx "" "umask: set and" "get file creation mask." "" umask.2
.xx "" "stat, fstat:" "get file status." "" stat.2
.xx "" "ustat:" "get file system statistics." "" ustat.2
.xx "file." "" "get: get a version of an SCCS" "" get.1
.xx "" "/getgrnam, setgrent, endgrent:" "get group file entry." "" getgrent.3c
.xx "" "getlogin:" "get login name." "" getlogin.3c
.xx "" "logname:" "get login name." "" logname.1
.xx "" "msgget:" "get message queue." "" msgget.2
.xx "" "getpw:" "get name from UID." "" getpw.3c
.xx "" "gethostname:" "get name of current host." "" gethostname.2
.xx "system." "uname:" "get name of current UNIX" "" uname.2
.xx "" "unget: undo a previous" "get of an SCCS file." "" unget.1
.xx "argument vector." "getopt:" "get option letter from" "" getopt.3c
.xx "" "/getpwnam, setpwent, endpwent:" "get password file entry." "" getpwent.3c
.xx "working directory." "getcwd:" "get pathname of current" "" getcwd.3c
.xx "times." "times:" "get process and child process" "" times.2
.xx "and/" "getpid, getpgrp, getppid:" "get process, process group," "" getpid.2
.xx "" "/geteuid, getgid, getegid:" "get real user, effective user,/" "" getuid.2
.xx "" "semget:" "get set of semaphores." "" semget.2
.xx "" "shmget:" "get shared memory segment." "" shmget.2
.xx "" "tty:" "get the terminal's name." "" tty.1
.xx "" "time:" "get time." "" time.2
.xx "get character or word from/" "" "getc, getchar, fgetc, getw:" "" getc.3s
.xx "character or word from/" "getc," "getchar, fgetc, getw: get" "" getc.3s
.xx "current working directory." "" "getcwd: get pathname of" "" getcwd.3c
.xx "" "getuid, geteuid, getgid," "getegid: get real user,/" "" getuid.2
.xx "environment name." "" "getenv: return value for" "" getenv.3c
.xx "real user, effective/" "getuid," "geteuid, getgid, getegid: get" "" getuid.2
.xx "user,/" "getuid, geteuid," "getgid, getegid: get real" "" getuid.2
.xx "setgrent, endgrent: get group/" "" "getgrent, getgrgid, getgrnam," "" getgrent.3c
.xx "endgrent: get group/" "getgrent," "getgrgid, getgrnam, setgrent," "" getgrent.3c
.xx "get group/" "getgrent, getgrgid," "getgrnam, setgrent, endgrent:" "" getgrent.3c
.xx "current host." "" "gethostname: get name of" "" gethostname.2
.xx "" "" "getlogin: get login name." "" getlogin.3c
.xx "argument vector." "" "getopt: get option letter from" "" getopt.3c
.xx "" "" "getopt: parse command options." "" getopt.1
.xx "" "" "getpass: read a password." "" getpass.3c
.xx "process group, and/" "getpid," "getpgrp, getppid: get process," "" getpid.2
.xx "process, process group, and/" "" "getpid, getpgrp, getppid: get" "" getpid.2
.xx "group, and/" "getpid, getpgrp," "getppid: get process, process" "" getpid.2
.xx "" "" "getpw: get name from UID." "" getpw.3c
.xx "setpwent, endpwent: get/" "" "getpwent, getpwuid, getpwnam," "" getpwent.3c
.xx "get/" "getpwent, getpwuid," "getpwnam, setpwent, endpwent:" "" getpwent.3c
.xx "endpwent: get/" "getpwent," "getpwuid, getpwnam, setpwent," "" getpwent.3c
.xx "a stream." "" "gets, fgets: get a string from" "" gets.3s
.xx "" "and terminal settings used by" "getty." "gettydefs: speed" gettydefs.4
.xx "modes, speed, and line/" "" "getty: set terminal type," "" getty.1m
.xx "" "ct: spawn" "getty to a remote terminal." "" ct.1c
.xx "settings used by getty." "" "gettydefs: speed and terminal" "" gettydefs.4
.xx "getegid: get real user,/" "" "getuid, geteuid, getgid," "" getuid.2
.xx "pututline, setutent,/" "" "getutent, getutid, getutline," "" getut.3c
.xx "setutent, endutent,/" "getutent," "getutid, getutline, pututline," "" getut.3c
.xx "setutent,/" "getutent, getutid," "getutline, pututline," "" getut.3c
.xx "from/" "getc, getchar, fgetc," "getw: get character or word" "" getc.3s
.xx "convert/" "ctime, localtime," "gmtime, asctime, tzset:" "" ctime.3c
.xx "" "fish: play" "``Go Fish''." "" fish.6
.xx "" "setjmp, long\|jmp: non-local" "goto." "" setjmp.3c
.xx "string, format of graphical/" "" "gps: graphical primitive" "" gps.4
.xx "" "cflow: generate C flow" "graph." "" cflow.1
.xx "" "sag: system activity" "graph." "" sag.1g
.xx "" "primitive string, format of" "graphical files." "/graphical" gps.4
.xx "format of graphical/" "gps:" "graphical primitive string," "" gps.4
.xx "" "tplot:" "graphics filters." "" tplot.1g
.xx "TTY-37 type-box." "greek:" "graphics for the extended" "" greek.5
.xx "" "plot:" "graphics interface." "" plot.4
.xx "subroutines." "plot:" "graphics interface" "" plot.3x
.xx "" "mvt: typeset documents, view" "graphs, and slides." "mmt," mmt.1
.xx "" "package for typesetting view" "graphs and slides." "/macro" mv.5
.xx "extended TTY-37 type-box." "" "greek: graphics for the" "" greek.5
.xx "" "" "greek: select terminal filter." "" greek.1
.xx "file for a pattern." "" "grep, egrep, fgrep: search a" "" grep.1
.xx "" "chown, chgrp: change owner or" "group." "" chown.1
.xx "" "newgrp: log in to a new" "group." "" newgrp.1
.xx "" "/user, effective user, real" "group, and effective group/" "" getuid.2
.xx "" "/getppid: get process, process" "group, and parent process IDs." "" getpid.2
.xx "" "group:" "group file." "" group.4
.xx "" "setgrent, endgrent: get" "group file entry." "/getgrnam," getgrent.3c
.xx "" "" "group: group file." "" group.4
.xx "" "setpgrp: set process" "group ID." "" setpgrp.2
.xx "" "real group, and effective" "group IDs." "/effective user," getuid.2
.xx "" "setuid, setgid: set user and" "group IDs." "" setuid.2
.xx "" "id: print user and" "group IDs and names." "" id.1
.xx "" "chown: change owner and" "group of a file." "" chown.2
.xx "" "a signal to a process or a" "group of processes." "/send" kill.2
.xx "" "update, and regenerate" "groups of programs." "/maintain," make.1
.xx "" "worm: Play the" "growing worm game." "" worm.6
.xx "checkers." "pwck," "grpck: password/group file" "" pwck.1m
.xx "" "ssignal," "gsignal: software signals." "" ssignal.3c
.xx "" "hangman:" "guess the word." "" hangman.6
.xx "" "moo:" "guessing game." "" moo.6
.xx "DASI 300 and 300s/" "300, 300s:" "handle special functions of" "" 300.1
.xx "2640 and 2621-series/" "hp:" "handle special functions of HP" "" hp.1
.xx "the DASI 450 terminal." "450:" "handle special functions of" "" 450.1
.xx "" "information for bad block" "handling." "/alternate block" altblk.4
.xx "" "" "hangman: guess the word." "" hangman.6
.xx "" "nohup: run a command immune to" "hangups (\fIsh\^\fR only)." "" nohup.1
.xx "" "hcreate, hdestroy: manage" "hash search tables." "hsearch," hsearch.3c
.xx "" "spell, hashmake, spellin," "hashcheck: find spelling/" "" spell.1
.xx "find spelling errors." "spell," "hashmake, spellin, hashcheck:" "" spell.1
.xx "search tables." "hsearch," "hcreate, hdestroy: manage hash" "" hsearch.3c
.xx "tables." "hsearch, hcreate," "hdestroy: manage hash search" "" hsearch.3c
.xx "" "help: ask for" "help." "" help.1
.xx "" "" "help: ask for help." "" help.1
.xx "into ASCII formats suitable/" "" "hex: translates object files" "" hex.1
.xx "" "fortune: print a random," "hopefully interesting, adage." "" fortune.6
.xx "" "get name of current" "host." "gethostname:" gethostname.2
.xx "" "sethostname: set name of" "host cpu." "" sethostname.2
.xx "" "ruptime: show" "host status of local machines" "" ruptime.1
.xx "" "set or print name of current" "host system" "hostname:" hostname.1
.xx "" "/etc/hosts:" "host table for bnet." "" hosts.7
.xx "current host system" "" "hostname: set or print name of" "" hostname.1
.xx "" "rhost, raddr: look up internet" "hosts by name or address." "" rhost.3
.xx "" "handle special functions of" "HP 2640 and 2621-series/" "hp:" hp.1
.xx "archiver." "hpio:" "HP 2645A terminal tape file" "" hpio.1
.xx "of HP 2640 and 2621-series/" "" "hp: handle special functions" "" hp.1
.xx "file archiver." "" "hpio: HP 2645A terminal tape" "" hpio.1
.xx "manage hash search tables." "" "hsearch, hcreate, hdestroy:" "" hsearch.3c
.xx "" "wump: the game of" "hunt-the-wumpus." "" wump.6
.xx "" "sinh, cosh, tanh:" "hyperbolic functions." "" sinh.3m
.xx "" "" "hyphen: find hyphenated words." "" hyphen.1
.xx "" "hyphen: find" "hyphenated words." "" hyphen.1
.xx "function." "" "hypot: Euclidean distance" "" hypot.3m
.xx "" "semaphore set or shared memory" "id." "/remove a message queue," ipcrm.1
.xx "" "setpgrp: set process group" "ID." "" setpgrp.2
.xx "and names." "" "id: print user and group IDs" "" id.1
.xx "" "issue: issue" "identification file." "" issue.4
.xx "file or file/" "fuser:" "identify processes using a" "" fuser.1m
.xx "" "what:" "identify SCCS files." "" what.1
.xx "" "group, and parent process" "IDs." "/get process, process" getpid.2
.xx "" "group, and effective group" "IDs." "/effective user, real" getuid.2
.xx "" "setgid: set user and group" "IDs." "setuid," setuid.2
.xx "" "id: print user and group" "IDs and names." "" id.1
.xx "" "core: format of core" "image file." "" core.4
.xx "" "pnch: file format for card" "images." "" pnch.4
.xx "only)." "nohup: run a command" "immune to hangups (\fIsh\^\fR" "" nohup.1
.xx "" "finc: fast" "incremental backup." "" finc.1m
.xx "" "long numeric data in a machine" "independent fashion.." "/access" sputl.3x
.xx "" "/tgoto, tputs: terminal" "independent operation/" "" termcap.3
.xx "" "for formatting a permuted" "index." "/the macro package" mptx.5
.xx "" "ptx: permuted" "index." "" ptx.1
.xx "and teletypes." "last:" "indicate last logins of users" "" last.1
.xx "family." "" "inet: Internet protocol" "" inet.5
.xx "" "inittab: script for the" "init process." "" inittab.4
.xx "initialization." "" "init, telinit: process control" "" init.1m
.xx "" "init, telinit: process control" "initialization." "" init.1m
.xx "" "/rc, powerfail: system" "initialization shell scripts." "" brc.1m
.xx "socket." "connect:" "initiate a connection on a" "" connect.2
.xx "process." "popen, pclose:" "initiate pipe to/from a" "" popen.3s
.xx "process." "" "inittab: script for the init" "" inittab.4
.xx "" "clri: clear" "i-node." "" clri.1m
.xx "" "inode: format of an" "inode." "" inode.4
.xx "" "" "inode: format of an inode." "" inode.4
.xx "" "sscanf: convert formatted" "input." "scanf, fscanf," scanf.3s
.xx "" "push character back into" "input stream." "ungetc:" ungetc.3s
.xx "" "fread, fwrite: binary" "input/output." "" fread.3s
.xx "" "stdio: standard buffered" "input/output package." "" stdio.3s
.xx "" "fileno: stream status" "inquiries." "/feof, clearerr," ferror.3s
.xx "" "uustat: uucp status" "inquiry and job control." "" uustat.1c
.xx "" "install:" "install commands." "" install.1m
.xx "" "" "install: install commands." "" install.1m
.xx "" "atol, atoi: convert string to" "integer." "strtol," strtol.3c
.xx "" "abs: return" "integer absolute value." "" abs.3c
.xx "" "/l64a: convert between long" "integer and base-64 ASCII/" "" a64l.3c
.xx "" "3-byte integers and long" "integers." "/convert between" l3tol.3c
.xx "" "/ltol3: convert between 3-byte" "integers and long integers." "" l3tol.3c
.xx "" "bcopy:" "interactive block copy." "" bcopy.1m
.xx "" "system consistency check and" "interactive repair." "/file" fsck.1m
.xx "" "print a random, hopefully" "interesting, adage." "fortune:" fortune.6
.xx "" "err: error-logging" "interface." "" err.7
.xx "" "loop: software loopback" "interface." "" lo.5
.xx "" "plot: graphics" "interface." "" plot.4
.xx "" "termio: general terminal" "interface." "" termio.7
.xx "" "tty: controlling terminal" "interface." "" tty.7
.xx "" "plot: graphics" "interface subroutines." "" plot.3x
.xx "" "rhost, raddr: look up" "internet hosts by name or/" "" rhost.3
.xx "" "ip:" "Internet Protocol." "" ip.5
.xx "" "inet:" "Internet protocol family." "" inet.5
.xx "Protocol." "tcp:" "Internet Transmission Control" "" tcp.5
.xx "Protocol." "udp:" "Internet User Datagram" "" udp.5
.xx "" "spline:" "interpolate smooth curve." "" spline.1g
.xx "characters." "asa:" "interpret ASA carriage control" "" asa.1
.xx "" "sno: SNOBOL" "interpreter." "" sno.1
.xx "syntax." "csh: a shell (command" "interpreter) with C-like" "" csh.1
.xx "" "pipe: create an" "interprocess channel." "" pipe.2
.xx "facilities/" "ipcs: report" "inter-process communication" "" ipcs.1
.xx "package." "stdipc: standard" "interprocess communication" "" stdipc.3c
.xx "" "suspend execution for an" "interval." "sleep:" sleep.1
.xx "" "sleep: suspend execution for" "interval." "" sleep.3c
.xx "commands and application/" "" "intro: introduction to" "" intro.1
.xx "formats." "" "intro: introduction to file" "" intro.4
.xx "" "" "intro: introduction to games." "" intro.6
.xx "miscellany." "" "intro: introduction to" "" intro.5
.xx "files." "" "intro: introduction to special" "" intro.7
.xx "subroutines and libraries." "" "intro: introduction to" "" intro.3
.xx "calls and error numbers." "" "intro: introduction to system" "" intro.2
.xx "maintenance commands and/" "" "intro: introduction to system" "" intro.1m
.xx "maintenance procedures." "" "intro: introduction to system" "" intro.8
.xx "application programs." "intro:" "introduction to commands and" "" intro.1
.xx "" "intro:" "introduction to file formats." "" intro.4
.xx "" "intro:" "introduction to games." "" intro.6
.xx "" "intro:" "introduction to miscellany." "" intro.5
.xx "facilities." "net:" "introduction to networking" "" net.5
.xx "" "intro:" "introduction to special files." "" intro.7
.xx "and libraries." "intro:" "introduction to subroutines" "" intro.3
.xx "and error numbers." "intro:" "introduction to system calls" "" intro.2
.xx "maintenance commands/" "intro:" "introduction to system" "" intro.1m
.xx "maintenance/" "intro:" "introduction to system" "" intro.8
.xx "" "ncheck: generate names from" "i-numbers." "" ncheck.1m
.xx "" "aliens: The alien" "invaders attack the earth." "" aliens.6
.xx "" "select: synchronous" "i/o multiplexing." "" select.2
.xx "" "" "ioctl: control device." "" ioctl.2
.xx "" "abort: generate an" "IOT fault." "" abort.3c
.xx "" "" "ip: Internet Protocol." "" ip.5
.xx "semaphore set or shared/" "" "ipcrm: remove a message queue," "" ipcrm.1
.xx "communication facilities/" "" "ipcs: report inter-process" "" ipcs.1
.xx "" "/islower, isdigit, isxdigit," "isalnum, isspace, ispunct,/" "" ctype.3c
.xx "isdigit, isxdigit, isalnum,/" "" "isalpha, isupper, islower," "" ctype.3c
.xx "" "/isprint, isgraph, iscntrl," "isascii: classify characters." "" ctype.3c
.xx "terminal." "ttyname," "isatty: find name of a" "" ttyname.3c
.xx "" "/ispunct, isprint, isgraph," "iscntrl, isascii: classify/" "" ctype.3c
.xx "" "isalpha, isupper, islower," "isdigit, isxdigit, isalnum,/" "" ctype.3c
.xx "" "/isspace, ispunct, isprint," "isgraph, iscntrl, isascii:/" "" ctype.3c
.xx "isalnum,/" "isalpha, isupper," "islower, isdigit, isxdigit," "" ctype.3c
.xx "" "/isalnum, isspace, ispunct," "isprint, isgraph, iscntrl,/" "" ctype.3c
.xx "" "/isxdigit, isalnum, isspace," "ispunct, isprint, isgraph,/" "" ctype.3c
.xx "" "/isdigit, isxdigit, isalnum," "isspace, ispunct, isprint,/" "" ctype.3c
.xx "" "system:" "issue a shell command." "" system.3s
.xx "" "issue:" "issue identification file." "" issue.4
.xx "file." "" "issue: issue identification" "" issue.4
.xx "isxdigit, isalnum,/" "isalpha," "isupper, islower, isdigit," "" ctype.3c
.xx "" "/isupper, islower, isdigit," "isxdigit, isalnum, isspace,/" "" ctype.3c
.xx "" "news: print news" "items." "" news.1
.xx "functions." "" "j0, j1, jn, y0, y1, yn: Bessel" "" bessel.3m
.xx "functions." "j0," "j1, jn, y0, y1, yn: Bessel" "" bessel.3m
.xx "" "bj: the game of black" "jack." "" bj.6
.xx "functions." "j0, j1," "jn, y0, y1, yn: Bessel" "" bessel.3m
.xx "operator." "" "join: relational database" "" join.1
.xx "" "/lrand48, nrand48, mrand48," "jrand48, srand48, seed48,/" "" drand48.3c
.xx "" "makekey: generate encryption" "key." "" makekey.1
.xx "" "killall:" "kill all active processes." "" killall.1m
.xx "process or a group of/" "" "kill: send a signal to a" "" kill.2
.xx "" "" "kill: terminate a process." "" kill.1
.xx "processes." "" "killall: kill all active" "" killall.1m
.xx "" "chase: Try to escape the" "killer robots." "" chase.6
.xx "" "mem," "kmem: core memory." "" mem.7
.xx "" "quiz: test your" "knowledge." "" quiz.6
.xx "3-byte integers and long/" "" "l3tol, ltol3: convert between" "" l3tol.3c
.xx "integer and base-64/" "a64l," "l64a: convert between long" "" a64l.3c
.xx "" "copy file systems with" "label checking." "/labelit:" volcopy.1m
.xx "with label checking." "volcopy," "labelit: copy file systems" "" volcopy.1m
.xx "" "scanning and processing" "language." "awk: pattern" awk.1
.xx "" "arbitrary-precision arithmetic" "language." "bc:" bc.1
.xx "" "ef\^l: Extended Fortran" "Language." "" efl.1
.xx "" "command programming" "language." "/standard/restricted" sh.1
.xx "" "cpp: the C" "language preprocessor." "" cpp.1
.xx "" "chargefee, ckpacct, dodisk," "lastlogin, monacct, nulladm,/" "" acctsh.1m
.xx "" "/jrand48, srand48, seed48," "lcong48: generate uniformly/" "" drand48.3c
.xx "" "" "ld: link editor." "" ld.1
.xx "of floating-point/" "frexp," "ldexp, modf: manipulate parts" "" frexp.3c
.xx "" "getopt: get option" "letter from argument vector." "" getopt.3c
.xx "simple lexical tasks." "" "lex: generate programs for" "" lex.1
.xx "" "generate programs for simple" "lexical tasks." "lex:" lex.1
.xx "" "to subroutines and" "libraries." "/introduction" intro.3
.xx "" "relation for an object" "library." "/find ordering" lorder.1
.xx "" "ar: archive" "(library) file format." "" ar.4
.xx "" "ar: archive and" "library maintainer." "" ar.1
.xx "" "ulimit: get and set user" "limits." "" ulimit.2
.xx "" "line: read one" "line." "" line.1
.xx "" "an out-going terminal" "line connection." "/establish" dial.3c
.xx "" "type, modes, speed, and" "line discipline." "/set terminal" getty.1m
.xx "" "nl:" "line numbering filter." "" nl.1
.xx "" "out selected fields of each" "line of a file." "cut: cut" cut.1
.xx "" "send/cancel requests to an LP" "line printer." "lp, cancel:" lp.1
.xx "" "lpr:" "line printer spooler." "" lpr.1
.xx "" "" "line: read one line." "" line.1
.xx "" "lsearch:" "linear search and update." "" lsearch.3c
.xx "" "col: filter reverse" "line-feeds." "" col.1
.xx "" "head: give first few" "lines." "" head.1
.xx "files." "comm: select or reject" "lines common to two sorted" "" comm.1
.xx "" "uniq: report repeated" "lines in a file." "" uniq.1
.xx "" "of several files or subsequent" "lines of one file." "/same lines" paste.1
.xx "subsequent/" "paste: merge same" "lines of several files or" "" paste.1
.xx "" "link, unlink: exercise" "link and unlink system calls." "" link.1m
.xx "" "ld:" "link editor." "" ld.1
.xx "" "a.out: assembler and" "link editor output." "" a.out.4
.xx "" "" "link: link to a file." "" link.2
.xx "" "cp, ln, mv: copy," "link or move files." "" cp.1
.xx "" "link:" "link to a file." "" link.2
.xx "and unlink system calls." "" "link, unlink: exercise link" "" link.1m
.xx "" "" "lint: a C program checker." "" lint.1
.xx "" "nlist: get entries from name" "list." "" nlist.3c
.xx "" "nm: print name" "list." "" nm.1
.xx "" "ls:" "list contents of directories." "" ls.1
.xx "(Berkeley version)." "ls7:" "list contents of directory" "" ls7.1
.xx "for a file system." "f\&f:" "list file names and statistics" "" ff.1m
.xx "by fsck." "checklist:" "list of file systems processed" "" checklist.4
.xx "" "xargs: construct argument" "list(s) and execute command." "" xargs.1
.xx "files." "cp," "ln, mv: copy, link or move" "" cp.1
.xx "tzset: convert date/" "ctime," "localtime, gmtime, asctime," "" ctime.3c
.xx "" "end, etext, edata: last" "locations in program." "" end.3c
.xx "memory." "plock:" "lock process, text, or data in" "" plock.2
.xx "regions for reading or/" "" "lockf: provide exclusive file" "" lockf.2
.xx "" "gamma:" "log gamma function." "" gamma.3m
.xx "" "newgrp:" "log in to a new group." "" newgrp.1
.xx "exponential, logarithm,/" "exp," "log, log10, pow, sqrt:" "" exp.3m
.xx "logarithm, power,/" "exp, log," "log10, pow, sqrt: exponential," "" exp.3m
.xx "" "/log10, pow, sqrt: exponential," "logarithm, power, square root/" "" exp.3m
.xx "" "errpt: process a report of" "logged errors." "" errpt.1m
.xx "" "rwho: who is" "logged in on local machines" "" rwho.1
.xx "" "rlogin: remote" "login" "" rlogin.1
.xx "" "getlogin: get" "login name." "" getlogin.3c
.xx "" "logname: get" "login name." "" logname.1
.xx "" "cuserid: get character" "login name of the user." "" cuserid.3s
.xx "" "logname: return" "login name of user." "" logname.3x
.xx "" "passwd: change" "login password." "" passwd.1
.xx "" "" "login: sign on." "" login.1
.xx "" "setting up an environment at" "login time." "profile:" profile.4
.xx "" "last: indicate last" "logins of users and teletypes." "" last.1
.xx "" "" "logname: get login name." "" logname.1
.xx "user." "" "logname: return login name of" "" logname.3x
.xx "" "a64l, l64a: convert between" "long integer and base-64 ASCII/" "" a64l.3c
.xx "" "between 3-byte integers and" "long integers." "/ltol3: convert" l3tol.3c
.xx "" "sputl, sgetl: access" "long numeric data in a machine/" "" sputl.3x
.xx "" "setjmp," "long\|jmp: non-local goto." "" setjmp.3c
.xx "interface." "" "loop: software loopback" "" lo.5
.xx "" "loop: software" "loopback interface." "" lo.5
.xx "for an object library." "" "lorder: find ordering relation" "" lorder.1
.xx "" "mklost+found: make a" "lost+found directory for fsck." "" mklost+fnd.1m
.xx "" "nice: run a command at" "low priority." "" nice.1
.xx "requests to an LP line/" "" "lp, cancel: send/cancel" "" lp.1
.xx "" "send/cancel requests to an" "LP line printer." "lp, cancel:" lp.1
.xx "" "disable: enable/disable" "LP printers." "enable," enable.1
.xx "" "/lpshut, lpmove: start/stop the" "LP request scheduler and move/" "" lpsched.1m
.xx "" "accept, reject: allow/prevent" "LP requests." "" accept.1m
.xx "" "lpadmin: configure the" "LP spooling system." "" lpadmin.1m
.xx "" "lpstat: print" "LP status information." "" lpstat.1
.xx "spooling system." "" "lpadmin: configure the LP" "" lpadmin.1m
.xx "request/" "lpsched, lpshut," "lpmove: start/stop the LP" "" lpsched.1m
.xx "" "" "lpr: line printer spooler." "" lpr.1
.xx "start/stop the LP request/" "" "lpsched, lpshut, lpmove:" "" lpsched.1m
.xx "LP request scheduler/" "lpsched," "lpshut, lpmove: start/stop the" "" lpsched.1m
.xx "information." "" "lpstat: print LP status" "" lpstat.1
.xx "jrand48,/" "drand48, erand48," "lrand48, nrand48, mrand48," "" drand48.3c
.xx "directories." "" "ls: list contents of" "" ls.1
.xx "directory (Berkeley version)." "" "ls7: list contents of" "" ls7.1
.xx "update." "" "lsearch: linear search and" "" lsearch.3c
.xx "pointer." "" "lseek: move read/write file" "" lseek.2
.xx "integers and long/" "l3tol," "ltol3: convert between 3-byte" "" l3tol.3c
.xx "" "" "m4: macro processor." "" m4.1
.xx "truth value about your/" "" "m68k, pdp11, u3b, vax: provide" "" machid.1
.xx "" "put: puts a file onto a remote" "machine.." "" put.1c
.xx "" "puts a file onto a remote" "machine.." "put7:" put7.1c
.xx "" "takes a file from a remote" "machine." "take:" take.1c
.xx "" "takes a file from a remote" "machine.." "take7:" take7.1c
.xx "" "/access long numeric data in a" "machine independent fashion.." "" sputl.3x
.xx "" "show host status of local" "machines" "ruptime:" ruptime.1
.xx "" "who is logged in on local" "machines" "rwho:" rwho.1
.xx "" "update files between two" "machines." "updater:" updater.1
.xx "" "update files between two" "machines." "updater:" updater.1m
.xx "permuted index." "mptx: the" "macro package for formatting a" "" mptx.5
.xx "documents." "mm: the MM" "macro package for formatting" "" mm.5
.xx "" "mosd: the OSDD adapter" "macro package for formatting/" "" mosd.5
.xx "view graphs and/" "mv: a troff" "macro package for typesetting" "" mv.5
.xx "" "m4:" "macro processor." "" m4.1
.xx "" "formatted with the MM" "macros." "/print/check documents" mm.1
.xx "in this manual." "man:" "macros for formatting entries" "" man.5
.xx "" "tp:" "magnetic tape format." "" tp.4
.xx "" "send mail to users or read" "mail." "mail, rmail:" mail.1
.xx "users or read mail." "" "mail, rmail: send mail to" "" mail.1
.xx "" "netmail: the bnet network" "mail system." "" netmail.8
.xx "" "netmailer: deliver" "mail to." "" netmailer.8
.xx "" "delivermail: deliver" "mail to arbitrary people." "" delivermail.8
.xx "" "mail, rmail: send" "mail to users or read mail." "" mail.1
.xx "" "malloc, free, realloc, calloc:" "main memory allocator." "" malloc.3c
.xx "program." "ctags:" "maintain a tags file for a C" "" ctags.1
.xx "regenerate groups of/" "make:" "maintain, update, and" "" make.1
.xx "" "ar: archive and library" "maintainer." "" ar.1
.xx "" "intro: introduction to system" "maintenance commands and/" "" intro.1m
.xx "" "intro: introduction to system" "maintenance procedures." "" intro.8
.xx "SCCS file." "delta:" "make a delta (change) to an" "" delta.1
.xx "" "mkdir:" "make a directory." "" mkdir.1
.xx "or ordinary file." "mknod:" "make a directory, or a special" "" mknod.2
.xx "for fsck." "mklost+found:" "make a lost+found directory" "" mklost+fnd.1m
.xx "" "mktemp:" "make a unique file name." "" mktemp.3c
.xx "regenerate groups of/" "" "make: maintain, update, and" "" make.1
.xx "" "ssp:" "make output single spaced." "" ssp.1
.xx "" "banner:" "make posters." "" banner.1
.xx "key." "" "makekey: generate encryption" "" makekey.1
.xx "main memory allocator." "" "malloc, free, realloc, calloc:" "" malloc.3c
.xx "entries in this manual." "" "man: macros for formatting" "" man.5
.xx "this manual." "" "man, manprog: print entries in" "" man.1
.xx "" "tsearch, tdelete, twalk:" "manage binary search trees." "" tsearch.3c
.xx "" "hsearch, hcreate, hdestroy:" "manage hash search tables." "" hsearch.3c
.xx "records." "fwtmp, wtmpfix:" "manipulate connect accounting" "" fwtmp.1m
.xx "" "frexp, ldexp, modf:" "manipulate parts of/" "" frexp.3c
.xx "" "tp:" "manipulate tape archive." "" tp.1
.xx "manual." "man," "manprog: print entries in this" "" man.1
.xx "" "manprog: print entries in this" "manual." "man," man.1
.xx "" "for formatting entries in this" "manual." "man: macros" man.5
.xx "" "ascii:" "map of ASCII character set." "" ascii.5
.xx "files." "diffmk:" "mark differences between" "" diffmk.1
.xx "" "umask: set file-creation mode" "mask." "" umask.1
.xx "" "set and get file creation" "mask." "umask:" umask.2
.xx "" "an error message file by" "massaging C source." "/create" mkstr.1
.xx "table." "master:" "master device information" "" master.4
.xx "information table." "" "master: master device" "" master.4
.xx "" "regular expression compile and" "match routines." "regexp:" regexp.5
.xx "" "eqn, neqn, checkeq: format" "mathematical text for nroff or/" "" eqn.1
.xx "function." "" "matherr: error-handling" "" matherr.3m
.xx "" "maze: generate a" "maze." "" maze.6
.xx "" "" "maze: generate a maze." "" maze.6
.xx "" "bcd: convert to antique" "media." "" bcd.6
.xx "" "" "mem, kmem: core memory." "" mem.7
.xx "memcpy, memset: memory/" "" "memccpy, memchr, memcmp," "" memory.3c
.xx "memset: memory/" "memccpy," "memchr, memcmp, memcpy," "" memory.3c
.xx "operations." "memccpy, memchr," "memcmp, memcpy, memset: memory" "" memory.3c
.xx "" "memccpy, memchr, memcmp," "memcpy, memset: memory/" "" memory.3c
.xx "" "mem, kmem: core" "memory." "" mem.7
.xx "" "lock process, text, or data in" "memory." "plock:" plock.2
.xx "" "free, realloc, calloc: main" "memory allocator." "malloc," malloc.3c
.xx "" "shmctl: shared" "memory control operations." "" shmctl.2
.xx "" "queue, semaphore set or shared" "memory id." "/remove a message" ipcrm.1
.xx "" "memcmp, memcpy, memset:" "memory operations." "/memchr," memory.3c
.xx "" "shmop: shared" "memory operations." "" shmop.2
.xx "" "shmget: get shared" "memory segment." "" shmget.2
.xx "" "/memchr, memcmp, memcpy," "memset: memory operations." "" memory.3c
.xx "" "sort: sort and/or" "merge files." "" sort.1
.xx "files." "acctmerg:" "merge or add total accounting" "" acctmerg.1m
.xx "files or subsequent/" "paste:" "merge same lines of several" "" paste.1
.xx "" "" "mesg: permit or deny messages." "" mesg.1
.xx "" "msgctl:" "message control operations." "" msgctl.2
.xx "" "mkstr: create an error" "message file by massaging C/" "" mkstr.1
.xx "" "receive: receive" "message from a socket." "" receive.2
.xx "" "send: send" "message from a socket." "" send.2
.xx "" "msgop:" "message operations." "" msgop.2
.xx "" "msgget: get" "message queue." "" msgget.2
.xx "or shared/" "ipcrm: remove a" "message queue, semaphore set" "" ipcrm.1
.xx "" "mesg: permit or deny" "messages." "" mesg.1
.xx "" "sys_nerr: system error" "messages." "/errno, sys_errlist," perror.3c
.xx "" "" "mkdir: make a directory." "" mkdir.1
.xx "" "" "mkfs: construct a file system." "" mkfs.1m
.xx "system." "" "mkfs512: construct a file" "" mkfs512.1m
.xx "lost+found directory for/" "" "mklost+found: make a" "" mklost+fnd.1m
.xx "" "" "mknod: build special file." "" mknod.1m
.xx "special or ordinary file." "" "mknod: make a directory, or a" "" mknod.2
.xx "file by massaging C source." "" "mkstr: create an error message" "" mkstr.1
.xx "name." "" "mktemp: make a unique file" "" mktemp.3c
.xx "formatting documents." "mm: the" "MM macro package for" "" mm.5
.xx "" "documents formatted with the" "MM macros." "/print/check" mm.1
.xx "documents formatted with the/" "" "mm, osdd, checkmm: print/check" "" mm.1
.xx "formatting documents." "" "mm: the MM macro package for" "" mm.5
.xx "view graphs, and slides." "" "mmt, mvt: typeset documents," "" mmt.1
.xx "table." "" "mnttab: mounted file system" "" mnttab.4
.xx "" "chmod: change" "mode." "" chmod.1
.xx "" "umask: set file-creation" "mode mask." "" umask.1
.xx "" "chmod: change" "mode of file." "" chmod.2
.xx "" "tset: set terminal" "modes." "" tset.1
.xx "" "getty: set terminal type," "modes, speed, and line/" "" getty.1m
.xx "" "bs: a compiler/interpreter for" "modest-sized programs." "" bs.1
.xx "floating-point/" "frexp, ldexp," "modf: manipulate parts of" "" frexp.3c
.xx "" "utime: set file access and" "modification times." "" utime.2
.xx "" "touch: update access and" "modification times of a file." "" touch.1
.xx "" "/ckpacct, dodisk, lastlogin," "monacct, nulladm, prctmp,/" "" acctsh.1m
.xx "profile." "" "monitor: prepare execution" "" monitor.3c
.xx "" "uusub:" "monitor uucp network." "" uusub.1m
.xx "" "" "moo: guessing game." "" moo.6
.xx "package for formatting/" "" "mosd: the OSDD adapter macro" "" mosd.5
.xx "" "/ASCII formats suitable for" "Motorola S-record downloading." "" hex.1
.xx "" "rcvhex: translates" "Motorola S-records from/" "" rcvhex.1
.xx "" "mount:" "mount a file system." "" mount.2
.xx "system." "mount, umount:" "mount and dismount file" "" mount.1m
.xx "" "" "mount: mount a file system." "" mount.2
.xx "" "setmnt: establish" "mount table." "" setmnt.1m
.xx "dismount file system." "" "mount, umount: mount and" "" mount.1m
.xx "" "mnttab:" "mounted file system table." "" mnttab.4
.xx "" "mvdir:" "move a directory." "" mvdir.1m
.xx "" "cp, ln, mv: copy, link or" "move files." "" cp.1
.xx "" "lseek:" "move read/write file pointer." "" lseek.2
.xx "" "the LP request scheduler and" "move requests." "/start/stop" lpsched.1m
.xx "formatting a permuted index." "" "mptx: the macro package for" "" mptx.5
.xx "" "/erand48, lrand48, nrand48," "mrand48, jrand48, srand48,/" "" drand48.3c
.xx "operations." "" "msgctl: message control" "" msgctl.2
.xx "" "" "msgget: get message queue." "" msgget.2
.xx "" "" "msgop: message operations." "" msgop.2
.xx "" "select: synchronous i/o" "multiplexing." "" select.2
.xx "typesetting view graphs and/" "" "mv: a troff macro package for" "" mv.5
.xx "" "cp, ln," "mv: copy, link or move files." "" cp.1
.xx "" "" "mvdir: move a directory." "" mvdir.1m
.xx "graphs, and slides." "mmt," "mvt: typeset documents, view" "" mmt.1
.xx "i-numbers." "" "ncheck: generate names from" "" ncheck.1m
.xx "" "definitions for eqn and" "neqn." "/special character" eqnchar.5
.xx "mathematical text for/" "eqn," "neqn, checkeq: format" "" eqn.1
.xx "networking facilities." "" "net: introduction to" "" net.5
.xx "system." "" "netmail: the bnet network mail" "" netmail.8
.xx "" "" "netmailer: deliver mail to." "" netmailer.8
.xx "" "uusub: monitor uucp" "network." "" uusub.1m
.xx "" "netmail: the bnet" "network mail system." "" netmail.8
.xx "" "rstat:" "network statistics program" "" rstat.1
.xx "" "net: introduction to" "networking facilities." "" net.5
.xx "a text file." "" "newform: change the format of" "" newform.1
.xx "" "" "newgrp: log in to a new group." "" newgrp.1
.xx "" "news: print" "news items." "" news.1
.xx "" "" "news: print news items." "" news.1
.xx "process." "" "nice: change priority of a" "" nice.2
.xx "priority." "" "nice: run a command at low" "" nice.1
.xx "" "" "nl: line numbering filter." "" nl.1
.xx "list." "" "nlist: get entries from name" "" nlist.3c
.xx "" "" "nm: print name list." "" nm.1
.xx "hangups (\fIsh\^\fR only)." "" "nohup: run a command immune to" "" nohup.1
.xx "" "setjmp, long\|jmp:" "non-local goto." "" setjmp.3c
.xx "" "drand48, erand48, lrand48," "nrand48, mrand48, jrand48,/" "" drand48.3c
.xx "" "" "nroff: format text." "" nroff.1
.xx "" "format mathematical text for" "nroff or troff." "/checkeq:" eqn.1
.xx "" "tbl: format tables for" "nroff or troff." "" tbl.1
.xx "typesetting." "" "nroff7: text formatting and" "" nroff7.1
.xx "constructs." "deroff: remove" "nroff/troff, tbl, and eqn" "" deroff.1
.xx "" "null: the" "null file." "" null.7
.xx "" "" "null: the null file." "" null.7
.xx "" "/dodisk, lastlogin, monacct," "nulladm, prctmp, prdaily,/" "" acctsh.1m
.xx "" "nl: line" "numbering filter." "" nl.1
.xx "" "number: convert Arabic" "numerals to English." "" number.6
.xx "" "sputl, sgetl: access long" "numeric data in a machine/" "" sputl.3x
.xx "" "dump selected parts of an" "object file." "dump:" dump.1
.xx "" "size: size of an" "object file." "" size.1
.xx "formats/" "hex: translates" "object files into ASCII" "" hex.1
.xx "" "find ordering relation for an" "object library." "lorder:" lorder.1
.xx "" "/the printable strings in an" "object, or other binary file." "" strings.1
.xx "" "od:" "octal dump." "" od.1
.xx "" "" "od: octal dump." "" od.1
.xx "" "immune to hangups (\fIsh\^\fR" "only)." "nohup: run a command" nohup.1
.xx "the specified/" "exterr - turn" "on/off the extended errors in" "" exterr.1
.xx "" "put: puts a file" "onto a remote machine.." "" put.1c
.xx "" "put7: puts a file" "onto a remote machine.." "" put7.1c
.xx "" "fopen, freopen, fdopen:" "open a stream." "" fopen.3s
.xx "" "dup: duplicate an" "open file descriptor." "" dup.2
.xx "" "open:" "open for reading or writing." "" open.2
.xx "writing." "" "open: open for reading or" "" open.2
.xx "" "/prfdc, prfsnap, prfpr:" "operating system profiler." "" profiler.1m
.xx "" "tputs: terminal independent" "operation routines." "/tgoto," termcap.3
.xx "" "memcmp, memcpy, memset: memory" "operations." "memccpy, memchr," memory.3c
.xx "" "msgctl: message control" "operations." "" msgctl.2
.xx "" "msgop: message" "operations." "" msgop.2
.xx "" "semctl: semaphore control" "operations." "" semctl.2
.xx "" "semop: semaphore" "operations." "" semop.2
.xx "" "shmctl: shared memory control" "operations." "" shmctl.2
.xx "" "shmop: shared memory" "operations." "" shmop.2
.xx "" "strcspn, strtok: string" "operations." "/strpbrk, strspn," string.3c
.xx "" "join: relational database" "operator." "" join.1
.xx "" "dcopy: copy file systems for" "optimal access time." "" dcopy.1m
.xx "vector." "getopt: get" "option letter from argument" "" getopt.3c
.xx "" "fcntl: file control" "options." "" fcntl.5
.xx "" "getopt: parse command" "options." "" getopt.1
.xx "" "stty: set the" "options for a terminal." "" stty.1
.xx "object library." "lorder: find" "ordering relation for an" "" lorder.1
.xx "" "a directory, or a special or" "ordinary file." "mknod: make" mknod.2
.xx "editor based/" "vi, view: screen" "oriented (visual) display" "" vi.1
.xx "formatting/" "mosd: the" "OSDD adapter macro package for" "" mosd.5
.xx "documents formatted with/" "mm," "osdd, checkmm: print/check" "" mm.1
.xx "" "dial: establish an" "out-going terminal line/" "" dial.3c
.xx "" "assembler and link editor" "output." "a.out:" a.out.4
.xx "" "sprintf: print formatted" "output." "printf, fprintf," printf.3s
.xx "" "ssp: make" "output single spaced." "" ssp.1
.xx "" "/acctdusg, accton, acctwtmp:" "overview of accounting and/" "" acct.1m
.xx "" "chown: change" "owner and group of a file." "" chown.2
.xx "" "chown, chgrp: change" "owner or group." "" chown.1
.xx "and expand files." "" "pack, pcat, unpack: compress" "" pack.1
.xx "" "sadc: system activity report" "package." "sa1, sa2," sar.1m
.xx "" "standard buffered input/output" "package." "stdio:" stdio.3s
.xx "" "interprocess communication" "package." "stdipc: standard" stdipc.3c
.xx "permuted/" "mptx: the macro" "package for formatting a" "" mptx.5
.xx "documents." "mm: the MM macro" "package for formatting" "" mm.5
.xx "" "mosd: the OSDD adapter macro" "package for formatting/" "" mosd.5
.xx "graphs and/" "mv: a troff macro" "package for typesetting view" "" mv.5
.xx "4014 terminal." "4014:" "paginator for the Tektronix" "" 4014.1
.xx "" "tune floppy disk settling time" "parameters." "disktune -" disktune.1m
.xx "" "process, process group, and" "parent process IDs." "/get" getpid.2
.xx "" "getopt:" "parse command options." "" getopt.1
.xx "" "" "passwd: change login password." "" passwd.1
.xx "" "" "passwd: password file." "" passwd.4
.xx "" "getpass: read a" "password." "" getpass.3c
.xx "" "passwd: change login" "password." "" passwd.1
.xx "" "passwd:" "password file." "" passwd.4
.xx "" "/setpwent, endpwent: get" "password file entry." "" getpwent.3c
.xx "" "putpwent: write" "password file entry." "" putpwent.3c
.xx "" "pwck, grpck:" "password/group file checkers." "" pwck.1m
.xx "several files or subsequent/" "" "paste: merge same lines of" "" paste.1
.xx "" "dirname: deliver portions of" "path names." "basename," basename.1
.xx "directory." "getcwd: get" "pathname of current working" "" getcwd.3c
.xx "" "fgrep: search a file for a" "pattern." "grep, egrep," grep.1
.xx "processing language." "awk:" "pattern scanning and" "" awk.1
.xx "signal." "" "pause: suspend process until" "" pause.2
.xx "expand files." "pack," "pcat, unpack: compress and" "" pack.1
.xx "a process." "popen," "pclose: initiate pipe to/from" "" popen.3s
.xx "value about your/" "m68k," "pdp11, u3b, vax: provide truth" "" machid.1
.xx "" "mesg:" "permit or deny messages." "" mesg.1
.xx "" "macro package for formatting a" "permuted index." "mptx: the" mptx.5
.xx "" "ptx:" "permuted index." "" ptx.1
.xx "format." "acct:" "per-process accounting file" "" acct.4
.xx "" "acctcms: command summary from" "per-process accounting/" "" acctcms.1m
.xx "sys_nerr: system error/" "" "perror, errno, sys_errlist," "" perror.3c
.xx "viewing." "more: file" "perusal filter for crt" "" more.1
.xx "" "tc:" "phototypesetter simulator." "" tc.1
.xx "access physical addresses." "" "phys: allow a process to" "" phys.2
.xx "" "allow a process to access" "physical addresses." "phys:" phys.2
.xx "" "split: split a file into" "pieces." "" split.1
.xx "channel." "" "pipe: create an interprocess" "" pipe.2
.xx "" "tee:" "pipe fitting." "" tee.1
.xx "" "popen, pclose: initiate" "pipe to/from a process." "" popen.3s
.xx "" "fish:" "play ``Go Fish''." "" fish.6
.xx "" "life:" "play the game of life." "" life.6
.xx "" "worm:" "Play the growing worm game." "" worm.6
.xx "data in memory." "" "plock: lock process, text, or" "" plock.2
.xx "" "" "plot: graphics interface." "" plot.4
.xx "subroutines." "" "plot: graphics interface" "" plot.3x
.xx "images." "" "pnch: file format for card" "" pnch.4
.xx "" "lseek: move read/write file" "pointer." "" lseek.2
.xx "" "ftell: reposition a file" "pointer in a stream." "/rewind," fseek.3s
.xx "to/from a process." "" "popen, pclose: initiate pipe" "" popen.3s
.xx "" "data base of terminal types by" "port." "ttytype:" ttytype.4
.xx "" "basename, dirname: deliver" "portions of path names." "" basename.1
.xx "" "banner: make" "posters." "" banner.1
.xx "logarithm,/" "exp, log, log10," "pow, sqrt: exponential," "" exp.3m
.xx "" "/sqrt: exponential, logarithm," "power, square root functions." "" exp.3m
.xx "" "brc, bcheckrc, rc," "powerfail: system/" "" brc.1m
.xx "" "" "pr: print files." "" pr.1
.xx "" "/lastlogin, monacct, nulladm," "prctmp, prdaily, prtacct,/" "" acctsh.1m
.xx "" "/monacct, nulladm, prctmp," "prdaily, prtacct, runacct,/" "" acctsh.1m
.xx "for troff." "cw, checkcw:" "prepare constant-width text" "" cw.1
.xx "" "monitor:" "prepare execution profile." "" monitor.3c
.xx "" "cpp: the C language" "preprocessor." "" cpp.1
.xx "" "unget: undo a" "previous get of an SCCS file." "" unget.1
.xx "operating/" "prfld, prfstat," "prfdc, prfsnap, prfpr:" "" profiler.1m
.xx "prfsnap, prfpr: operating/" "" "prfld, prfstat, prfdc," "" profiler.1m
.xx "" "/prfstat, prfdc, prfsnap," "prfpr: operating system/" "" profiler.1m
.xx "system/" "prfld, prfstat, prfdc," "prfsnap, prfpr: operating" "" profiler.1m
.xx "prfpr: operating/" "prfld," "prfstat, prfdc, prfsnap," "" profiler.1m
.xx "graphical/" "gps: graphical" "primitive string, format of" "" gps.4
.xx "" "types:" "primitive system data types." "" types.5
.xx "interesting, adage." "fortune:" "print a random, hopefully" "" fortune.6
.xx "" "prs:" "print an SCCS file." "" prs.1
.xx "" "date:" "print and set the date." "" date.1
.xx "" "cal:" "print calendar." "" cal.1
.xx "of a file." "sum:" "print checksum and block count" "" sum.1
.xx "editing activity." "sact:" "print current SCCS file" "" sact.1
.xx "" "man, manprog:" "print entries in this manual." "" man.1
.xx "" "cat: concatenate and" "print files." "" cat.1
.xx "" "pr:" "print files." "" pr.1
.xx "" "printf, fprintf, sprintf:" "print formatted output." "" printf.3s
.xx "" "banner7:" "print large banner on printer." "" banner7.1
.xx "" "lpstat:" "print LP status information." "" lpstat.1
.xx "" "nm:" "print name list." "" nm.1
.xx "system" "hostname: set or" "print name of current host" "" hostname.1
.xx "System." "uname:" "print name of current UNIX" "" uname.1
.xx "" "news:" "print news items." "" news.1
.xx "" "printenv:" "print out the environment." "" printenv.1
.xx "file(s)." "acctcom: search and" "print process accounting" "" acctcom.1
.xx "" "pstat:" "print system facts." "" pstat.1m
.xx "names." "id:" "print user and group IDs and" "" id.1
.xx "object, or/" "strings: find the" "printable strings in an" "" strings.1
.xx "formatted/" "mm, osdd, checkmm:" "print/check documents" "" mm.1
.xx "environment." "" "printenv: print out the" "" printenv.1
.xx "" "banner7: print large banner on" "printer." "" banner7.1
.xx "" "requests to an LP line" "printer." "/cancel: send/cancel" lp.1
.xx "" "lpr: line" "printer spooler." "" lpr.1
.xx "" "disable: enable/disable LP" "printers." "enable," enable.1
.xx "print formatted output." "" "printf, fprintf, sprintf:" "" printf.3s
.xx "" "nice: run a command at low" "priority." "" nice.1
.xx "" "nice: change" "priority of a process." "" nice.2
.xx "" "exit, _exit: terminate" "process." "" exit.2
.xx "" "fork: create a new" "process." "" fork.2
.xx "" "inittab: script for the init" "process." "" inittab.4
.xx "" "kill: terminate a" "process." "" kill.1
.xx "" "nice: change priority of a" "process." "" nice.2
.xx "" "initiate pipe to/from a" "process." "popen, pclose:" popen.3s
.xx "" "wait: await completion of" "process." "" wait.1
.xx "errors." "errpt:" "process a report of logged" "" errpt.1m
.xx "" "acct: enable or disable" "process accounting." "" acct.2
.xx "" "acctprc1, acctprc2:" "process accounting." "" acctprc.1m
.xx "" "acctcom: search and print" "process accounting file(s)." "" acctcom.1
.xx "times." "times: get" "process and child process" "" times.2
.xx "" "init, telinit:" "process control/" "" init.1m
.xx "" "timex: time a command; report" "process data and system/" "" timex.1
.xx "" "/getpgrp, getppid: get process," "process group, and parent/" "" getpid.2
.xx "" "setpgrp: set" "process group ID." "" setpgrp.2
.xx "" "process group, and parent" "process IDs." "/get process," getpid.2
.xx "" "kill: send a signal to a" "process or a group of/" "" kill.2
.xx "" "getpid, getpgrp, getppid: get" "process, process group, and/" "" getpid.2
.xx "" "ps: report" "process status." "" ps.1
.xx "memory." "plock: lock" "process, text, or data in" "" plock.2
.xx "" "times: get process and child" "process times." "" times.2
.xx "addresses." "phys: allow a" "process to access physical" "" phys.2
.xx "" "wait: wait for child" "process to stop or terminate." "" wait.2
.xx "" "ptrace:" "process trace." "" ptrace.2
.xx "" "pause: suspend" "process until signal." "" pause.2
.xx "" "list of file systems" "processed by fsck." "checklist:" checklist.4
.xx "" "to a process or a group of" "processes." "/send a signal" kill.2
.xx "" "killall: kill all active" "processes." "" killall.1m
.xx "structure." "fuser: identify" "processes using a file or file" "" fuser.1m
.xx "" "shutdown: terminate all" "processing." "" shutdown.1m
.xx "" "awk: pattern scanning and" "processing language." "" awk.1
.xx "" "m4: macro" "processor." "" m4.1
.xx "" "provide truth value about your" "processor type." "/u3b, vax:" machid.1
.xx "" "alarm: set a" "process's alarm clock." "" alarm.2
.xx "" "" "prof: display profile data." "" prof.1
.xx "profile." "" "profil: execution time" "" profil.2
.xx "" "monitor: prepare execution" "profile." "" monitor.3c
.xx "" "profil: execution time" "profile." "" profil.2
.xx "" "prof: display" "profile data." "" prof.1
.xx "environment at login time." "" "profile: setting up an" "" profile.4
.xx "" "prfpr: operating system" "profiler." "/prfdc, prfsnap," profiler.1m
.xx "" "sadp: disk access" "profiler." "" sadp.1
.xx "" "standard/restricted command" "programming language." "/the" sh.1
.xx "" "ip: Internet" "Protocol." "" ip.5
.xx "" "Internet Transmission Control" "Protocol." "tcp:" tcp.5
.xx "" "udp: Internet User Datagram" "Protocol." "" udp.5
.xx "" "inet: Internet" "protocol family." "" inet.5
.xx "" "arithmetic:" "provide drill in number facts." "" arithmetic.6
.xx "for reading or/" "lockf:" "provide exclusive file regions" "" lockf.2
.xx "" "m68k, pdp11, u3b, vax:" "provide truth value about your/" "" machid.1
.xx "" "true, false:" "provide truth values." "" true.1
.xx "" "" "prs: print an SCCS file." "" prs.1
.xx "" "/nulladm, prctmp, prdaily," "prtacct, runacct, shutacct,/" "" acctsh.1m
.xx "" "" "ps: report process status." "" ps.1
.xx "" "/generate uniformly distributed" "pseudo-random numbers." "" drand48.3c
.xx "" "" "pstat: print system facts." "" pstat.1m
.xx "" "" "ptrace: process trace." "" ptrace.2
.xx "" "" "ptx: permuted index." "" ptx.1
.xx "stream." "ungetc:" "push character back into input" "" ungetc.3s
.xx "remote machine.." "" "put7: puts a file onto a" "" put7.1c
.xx "put character or word on a/" "" "putc, putchar, fputc, putw:" "" putc.3s
.xx "character or word on a/" "putc," "putchar, fputc, putw: put" "" putc.3s
.xx "entry." "" "putpwent: write password file" "" putpwent.3c
.xx "machine.." "put:" "puts a file onto a remote" "" put.1c
.xx "machine.." "put7:" "puts a file onto a remote" "" put7.1c
.xx "stream." "" "puts, fputs: put a string on a" "" puts.3s
.xx "" "getutent, getutid, getutline," "pututline, setutent, endutent,/" "" getut.3c
.xx "a/" "putc, putchar, fputc," "putw: put character or word on" "" putc.3s
.xx "file checkers." "" "pwck, grpck: password/group" "" pwck.1m
.xx "" "" "pwd: working directory name." "" pwd.1
.xx "" "" "qsort: quicker sort." "" qsort.3c
.xx "" "msgget: get message" "queue." "" msgget.2
.xx "" "ipcrm: remove a message" "queue, semaphore set or shared/" "" ipcrm.1
.xx "" "qsort:" "quicker sort." "" qsort.3c
.xx "" "" "quiz: test your knowledge." "" quiz.6
.xx "by name or address." "rhost," "raddr: look up internet hosts" "" rhost.3
.xx "display." "" "rain: animated raindrops" "" rain.6
.xx "" "rain: animated" "raindrops display." "" rain.6
.xx "random-number generator." "" "rand, srand: simple" "" rand.3c
.xx "adage." "fortune: print a" "random, hopefully interesting," "" fortune.6
.xx "" "rand, srand: simple" "random-number generator." "" rand.3c
.xx "" "fsplit: split fortran," "ratfor, or ef\^l files." "" fsplit.1
.xx "initialization/" "brc, bcheckrc," "rc, powerfail: system" "" brc.1m
.xx "" "" "rcp: remote file copy" "" rcp.1
.xx "S-records from downloading/" "" "rcvhex: translates Motorola" "" rcvhex.1
.xx "" "getpass:" "read a password." "" getpass.3c
.xx "" "read:" "read from file." "" read.2
.xx "" "rmail: send mail to users or" "read mail." "mail," mail.1
.xx "" "line:" "read one line." "" line.1
.xx "" "" "read: read from file." "" read.2
.xx "" "exclusive file regions for" "reading or writing." "/provide" lockf.2
.xx "" "open: open for" "reading or writing." "" open.2
.xx "" "lseek: move" "read/write file pointer." "" lseek.2
.xx "allocator." "malloc, free," "realloc, calloc: main memory" "" malloc.3c
.xx "" "" "reboot: reboot the system." "" reboot.2
.xx "" "reboot:" "reboot the system." "" reboot.2
.xx "" "specify what to do upon" "receipt of a signal." "signal:" signal.2
.xx "" "receive:" "receive message from a socket." "" receive.2
.xx "a socket." "" "receive: receive message from" "" receive.2
.xx "" "from per-process accounting" "records." "/command summary" acctcms.1m
.xx "" "manipulate connect accounting" "records." "fwtmp, wtmpfix:" fwtmp.1m
.xx "" "errdead: extract error" "records from dump." "" errdead.1m
.xx "tape." "frec:" "recover files from a backup" "" frec.1m
.xx "" "ed," "red: text editor." "" ed.1
.xx "" "generate C program cross" "reference." "cxref:" cxref.1
.xx "execute regular expression." "" "regcmp, regex: compile and" "" regcmp.3x
.xx "compile." "" "regcmp: regular expression" "" regcmp.1
.xx "" "make: maintain, update, and" "regenerate groups of programs." "" make.1
.xx "regular expression." "regcmp," "regex: compile and execute" "" regcmp.3x
.xx "compile and match routines." "" "regexp: regular expression" "" regexp.5
.xx "" "lockf: provide exclusive file" "regions for reading or/" "" lockf.2
.xx "" "regex: compile and execute" "regular expression." "regcmp," regcmp.3x
.xx "" "regcmp:" "regular expression compile." "" regcmp.1
.xx "match routines." "regexp:" "regular expression compile and" "" regexp.5
.xx "requests." "accept," "reject: allow/prevent LP" "" accept.1m
.xx "sorted files." "comm: select or" "reject lines common to two" "" comm.1
.xx "" "lorder: find ordering" "relation for an object/" "" lorder.1
.xx "" "join:" "relational database operator." "" join.1
.xx "" "strip: remove symbols and" "relocation bits." "" strip.1
.xx "" "/fmod, fabs: floor, ceiling," "remainder, absolute value/" "" floor.3m
.xx "" "calendar:" "reminder service." "" calendar.1
.xx "" "rcp:" "remote file copy" "" rcp.1
.xx "" "rlogin:" "remote login" "" rlogin.1
.xx "" "put: puts a file onto a" "remote machine.." "" put.1c
.xx "" "put7: puts a file onto a" "remote machine.." "" put7.1c
.xx "" "take: takes a file from a" "remote machine." "" take.1c
.xx "" "take7: takes a file from a" "remote machine.." "" take7.1c
.xx "" "remsh:" "remote shell" "" remsh.1
.xx "" "ct: spawn getty to a" "remote terminal." "" ct.1c
.xx "file." "rmdel:" "remove a delta from an SCCS" "" rmdel.1
.xx "semaphore set or/" "ipcrm:" "remove a message queue," "" ipcrm.1
.xx "" "unlink:" "remove directory entry." "" unlink.2
.xx "" "rm, rmdir:" "remove files or directories." "" rm.1
.xx "eqn constructs." "deroff:" "remove nroff/troff, tbl, and" "" deroff.1
.xx "bits." "strip:" "remove symbols and relocation" "" strip.1
.xx "" "" "remsh: remote shell" "" remsh.1
.xx "" "check and interactive" "repair." "/system consistency" fsck.1m
.xx "" "uniq: report" "repeated lines in a file." "" uniq.1
.xx "" "clock:" "report CPU time used." "" clock.3c
.xx "communication/" "ipcs:" "report inter-process" "" ipcs.1
.xx "blocks." "df:" "report number of free disk" "" df.1m
.xx "" "errpt: process a" "report of logged errors." "" errpt.1m
.xx "frequencies in a file." "freq:" "report on character" "" freq.1
.xx "" "sa2, sadc: system activity" "report package." "sa1," sar.1m
.xx "" "timex: time a command;" "report process data and system/" "" timex.1
.xx "" "ps:" "report process status." "" ps.1
.xx "file." "uniq:" "report repeated lines in a" "" uniq.1
.xx "" "sar: system activity" "reporter." "" sar.1
.xx "files." "version:" "reports version number of" "" version.1
.xx "stream." "fseek, rewind, ftell:" "reposition a file pointer in a" "" fseek.3s
.xx "" "/lpmove: start/stop the LP" "request scheduler and move/" "" lpsched.1m
.xx "" "reject: allow/prevent LP" "requests." "accept," accept.1m
.xx "" "LP request scheduler and move" "requests." "/start/stop the" lpsched.1m
.xx "" "lp, cancel: send/cancel" "requests to an LP line/" "" lp.1
.xx "to a sensible state." "" "reset: reset the teletype bits" "" reset.1
.xx "sensible state." "reset:" "reset the teletype bits to a" "" reset.1
.xx "a socket." "socketaddr:" "return address associated with" "" socketaddr.2
.xx "" "abs:" "return integer absolute value." "" abs.3c
.xx "" "logname:" "return login name of user." "" logname.3x
.xx "name." "getenv:" "return value for environment" "" getenv.3c
.xx "" "stat: data" "returned by stat system call." "" stat.5
.xx "configuration/" "uvar:" "returns system-specific" "" uvar.2
.xx "" "col: filter" "reverse line-feeds." "" col.1
.xx "file pointer in a/" "fseek," "rewind, ftell: reposition a" "" fseek.3s
.xx "" "creat: create a new file or" "rewrite an existing one." "" creat.2
.xx "hosts by name or address." "" "rhost, raddr: look up internet" "" rhost.3
.xx "" "" "rlogin: remote login" "" rlogin.1
.xx "directories." "" "rm, rmdir: remove files or" "" rm.1
.xx "read mail." "mail," "rmail: send mail to users or" "" mail.1
.xx "SCCS file." "" "rmdel: remove a delta from an" "" rmdel.1
.xx "directories." "rm," "rmdir: remove files or" "" rm.1
.xx "" "Escape from the automatic" "robots." "autorobots:" autorobots.6
.xx "" "Try to escape the killer" "robots." "chase:" chase.6
.xx "" "robots: Escape from the" "robots." "" robots.6
.xx "robots." "" "robots: Escape from the" "" robots.6
.xx "" "chroot: change" "root directory." "" chroot.2
.xx "" "chroot: change" "root directory for a command." "" chroot.1m
.xx "" "logarithm, power, square" "root functions." "/exponential," exp.3m
.xx "" "expression compile and match" "routines." "regexp: regular" regexp.5
.xx "" "terminal independent operation" "routines." "/tgoto, tputs:" termcap.3
.xx "standard/restricted/" "sh," "rsh: shell, the" "" sh.1
.xx "program" "" "rstat: network statistics" "" rstat.1
.xx "" "nice:" "run a command at low priority." "" nice.1
.xx "hangups (\fIsh\^\fR/" "nohup:" "run a command immune to" "" nohup.1
.xx "" "runacct:" "run daily accounting." "" runacct.1m
.xx "" "" "runacct: run daily accounting." "" runacct.1m
.xx "" "/prctmp, prdaily, prtacct," "runacct, shutacct, startup,/" "" acctsh.1m
.xx "local machines" "" "ruptime: show host status of" "" ruptime.1
.xx "local machines" "" "rwho: who is logged in on" "" rwho.1
.xx "activity report package." "" "sa1, sa2, sadc: system" "" sar.1m
.xx "report package." "sa1," "sa2, sadc: system activity" "" sar.1m
.xx "editing activity." "" "sact: print current SCCS file" "" sact.1
.xx "package." "sa1, sa2," "sadc: system activity report" "" sar.1m
.xx "" "" "sadp: disk access profiler." "" sadp.1
.xx "" "" "sag: system activity graph." "" sag.1g
.xx "" "" "sar: system activity reporter." "" sar.1
.xx "space allocation." "brk," "sbrk: change data segment" "" brk.2
.xx "formatted input." "" "scanf, fscanf, sscanf: convert" "" scanf.3s
.xx "" "bfs: big file" "scanner." "" bfs.1
.xx "language." "awk: pattern" "scanning and processing" "" awk.1
.xx "" "the delta commentary of an" "SCCS delta." "cdc: change" cdc.1
.xx "" "comb: combine" "SCCS deltas." "" comb.1
.xx "" "make a delta (change) to an" "SCCS file." "delta:" delta.1
.xx "" "get: get a version of an" "SCCS file." "" get.1
.xx "" "prs: print an" "SCCS file." "" prs.1
.xx "" "rmdel: remove a delta from an" "SCCS file." "" rmdel.1
.xx "" "compare two versions of an" "SCCS file." "sccsdiff:" sccsdiff.1
.xx "" "sccsfile: format of" "SCCS file." "" sccsfile.4
.xx "" "undo a previous get of an" "SCCS file." "unget:" unget.1
.xx "" "val: validate" "SCCS file." "" val.1
.xx "" "sact: print current" "SCCS file editing activity." "" sact.1
.xx "" "admin: create and administer" "SCCS files." "" admin.1
.xx "" "what: identify" "SCCS files." "" what.1
.xx "of an SCCS file." "" "sccsdiff: compare two versions" "" sccsdiff.1
.xx "" "" "sccsfile: format of SCCS file." "" sccsfile.4
.xx "" "/start/stop the LP request" "scheduler and move requests." "" lpsched.1m
.xx "" "clear: clear terminal" "screen." "" clear.1
.xx "" "twinkle: twinkle stars on the" "screen." "" twinkle.6
.xx "terminals." "se:" "screen editor for video" "" se.1
.xx "display editor/" "vi, view:" "screen oriented (visual)" "" vi.1
.xx "" "inittab:" "script for the init process." "" inittab.4
.xx "" "system initialization shell" "scripts." "/rc, powerfail:" brc.1m
.xx "program." "" "sdiff: side-by-side difference" "" sdiff.1
.xx "terminals." "" "se: screen editor for video" "" se.1
.xx "" "bsearch: binary" "search." "" bsearch.3c
.xx "" "grep, egrep, fgrep:" "search a file for a pattern." "" grep.1
.xx "accounting file(s)." "acctcom:" "search and print process" "" acctcom.1
.xx "" "lsearch: linear" "search and update." "" lsearch.3c
.xx "" "hcreate, hdestroy: manage hash" "search tables." "hsearch," hsearch.3c
.xx "" "tdelete, twalk: manage binary" "search trees." "tsearch," tsearch.3c
.xx "" "" "sed: stream editor." "" sed.1
.xx "" "/mrand48, jrand48, srand48," "seed48, lcong48: generate/" "" drand48.3c
.xx "" "shmget: get shared memory" "segment." "" shmget.2
.xx "" "brk, sbrk: change data" "segment space allocation." "" brk.2
.xx "to two sorted files." "comm:" "select or reject lines common" "" comm.1
.xx "multiplexing." "" "select: synchronous i/o" "" select.2
.xx "" "greek:" "select terminal filter." "" greek.1
.xx "of a file." "cut: cut out" "selected fields of each line" "" cut.1
.xx "file." "dump: dump" "selected parts of an object" "" dump.1
.xx "" "semctl:" "semaphore control operations." "" semctl.2
.xx "" "semop:" "semaphore operations." "" semop.2
.xx "" "ipcrm: remove a message queue," "semaphore set or shared memory/" "" ipcrm.1
.xx "" "semget: get set of" "semaphores." "" semget.2
.xx "operations." "" "semctl: semaphore control" "" semctl.2
.xx "" "" "semget: get set of semaphores." "" semget.2
.xx "" "" "semop: semaphore operations." "" semop.2
.xx "a group of processes." "kill:" "send a signal to a process or" "" kill.2
.xx "mail." "mail, rmail:" "send mail to users or read" "" mail.1
.xx "" "send:" "send message from a socket." "" send.2
.xx "socket." "" "send: send message from a" "" send.2
.xx "line printer." "lp, cancel:" "send/cancel requests to an LP" "" lp.1
.xx "" "reset the teletype bits to a" "sensible state." "reset:" reset.1
.xx "stream." "" "setbuf: assign buffering to a" "" setbuf.3s
.xx "IDs." "setuid," "setgid: set user and group" "" setuid.2
.xx "" "getgrent, getgrgid, getgrnam," "setgrent, endgrent: get group/" "" getgrent.3c
.xx "cpu." "" "sethostname: set name of host" "" sethostname.2
.xx "goto." "" "setjmp, long\|jmp: non-local" "" setjmp.3c
.xx "encryption." "crypt," "setkey, encrypt: generate DES" "" crypt.3c
.xx "" "" "setmnt: establish mount table." "" setmnt.1m
.xx "" "" "setpgrp: set process group ID." "" setpgrp.2
.xx "" "getpwent, getpwuid, getpwnam," "setpwent, endpwent: get/" "" getpwent.3c
.xx "login time." "profile:" "setting up an environment at" "" profile.4
.xx "" "gettydefs: speed and terminal" "settings used by getty." "" gettydefs.4
.xx "" "disktune - tune floppy disk" "settling time parameters." "" disktune.1m
.xx "group IDs." "" "setuid, setgid: set user and" "" setuid.2
.xx "" "/getutid, getutline, pututline," "setutent, endutent, utmpname:/" "" getut.3c
.xx "data in a machine/" "sputl," "sgetl: access long numeric" "" sputl.3x
.xx "standard/restricted command/" "" "sh, rsh: shell, the" "" sh.1
.xx "operations." "shmctl:" "shared memory control" "" shmctl.2
.xx "" "queue, semaphore set or" "shared memory id." "/a message" ipcrm.1
.xx "" "shmop:" "shared memory operations." "" shmop.2
.xx "" "shmget: get" "shared memory segment." "" shmget.2
.xx "" "remsh: remote" "shell" "" remsh.1
.xx "" "system: issue a" "shell command." "" system.3s
.xx "with C-like syntax." "csh: a" "shell (command interpreter)" "" csh.1
.xx "" "shutacct, startup, turnacct:" "shell procedures for/" "/runacct," acctsh.1m
.xx "" "system initialization" "shell scripts." "/rc, powerfail:" brc.1m
.xx "command programming/" "sh, rsh:" "shell, the standard/restricted" "" sh.1
.xx "operations." "" "shmctl: shared memory control" "" shmctl.2
.xx "segment." "" "shmget: get shared memory" "" shmget.2
.xx "operations." "" "shmop: shared memory" "" shmop.2
.xx "" "/prdaily, prtacct, runacct," "shutacct, startup, turnacct:/" "" acctsh.1m
.xx "processing." "" "shutdown: terminate all" "" shutdown.1m
.xx "program." "sdiff:" "side-by-side difference" "" sdiff.1
.xx "" "login:" "sign on." "" login.1
.xx "" "pause: suspend process until" "signal." "" pause.2
.xx "" "what to do upon receipt of a" "signal." "signal: specify" signal.2
.xx "upon receipt of a signal." "" "signal: specify what to do" "" signal.2
.xx "of processes." "kill: send a" "signal to a process or a group" "" kill.2
.xx "" "ssignal, gsignal: software" "signals." "" ssignal.3c
.xx "" "lex: generate programs for" "simple lexical tasks." "" lex.1
.xx "generator." "rand, srand:" "simple random-number" "" rand.3c
.xx "" "tc: phototypesetter" "simulator." "" tc.1
.xx "atan, atan2: trigonometric/" "" "sin, cos, tan, asin, acos," "" trig.3m
.xx "" "ssp: make output" "single spaced." "" ssp.1
.xx "functions." "" "sinh, cosh, tanh: hyperbolic" "" sinh.3m
.xx "" "size:" "size of an object file." "" size.1
.xx "" "" "size: size of an object file." "" size.1
.xx "an interval." "" "sleep: suspend execution for" "" sleep.1
.xx "interval." "" "sleep: suspend execution for" "" sleep.3c
.xx "" "documents, view graphs, and" "slides." "mmt, mvt: typeset" mmt.1
.xx "" "typesetting view graphs and" "slides." "/macro package for" mv.5
.xx "current/" "ttyslot: find the" "slot in the utmp file of the" "" ttyslot.3c
.xx "" "spline: interpolate" "smooth curve." "" spline.1g
.xx "" "" "sno: SNOBOL interpreter." "" sno.1
.xx "" "sno:" "SNOBOL interpreter." "" sno.1
.xx "" "accept a connection on a" "socket." "accept:" accept.2
.xx "" "initiate a connection on a" "socket." "connect:" connect.2
.xx "" "receive message from a" "socket." "receive:" receive.2
.xx "" "send: send message from a" "socket." "" send.2
.xx "" "address associated with a" "socket." "socketaddr: return" socketaddr.2
.xx "communication." "" "socket: create an endpoint for" "" socket.2
.xx "associated with a socket." "" "socketaddr: return address" "" socketaddr.2
.xx "" "loop:" "software loopback interface." "" lo.5
.xx "" "ssignal, gsignal:" "software signals." "" ssignal.3c
.xx "" "qsort: quicker" "sort." "" qsort.3c
.xx "" "tsort: topological" "sort." "" tsort.1
.xx "" "sort:" "sort and/or merge files." "" sort.1
.xx "" "" "sort: sort and/or merge files." "" sort.1
.xx "" "or reject lines common to two" "sorted files." "comm: select" comm.1
.xx "" "message file by massaging C" "source." "/create an error" mkstr.1
.xx "" "brk, sbrk: change data segment" "space allocation." "" brk.2
.xx "" "ssp: make output single" "spaced." "" ssp.1
.xx "terminal." "ct:" "spawn getty to a remote" "" ct.1c
.xx "" "fspec: format" "specification in text files." "" fspec.4
.xx "" "the extended errors in the" "specified device." "/turn on/off" exterr.1
.xx "receipt of a signal." "signal:" "specify what to do upon" "" signal.2
.xx "" "/set terminal type, modes," "speed, and line discipline." "" getty.1m
.xx "used by getty." "gettydefs:" "speed and terminal settings" "" gettydefs.4
.xx "hashcheck: find spelling/" "" "spell, hashmake, spellin," "" spell.1
.xx "spelling/" "spell, hashmake," "spellin, hashcheck: find" "" spell.1
.xx "" "spellin, hashcheck: find" "spelling errors." "/hashmake," spell.1
.xx "curve." "" "spline: interpolate smooth" "" spline.1g
.xx "" "csplit: context" "split." "" csplit.1
.xx "" "split:" "split a file into pieces." "" split.1
.xx "ef\^l files." "fsplit:" "split fortran, ratfor, or" "" fsplit.1
.xx "pieces." "" "split: split a file into" "" split.1
.xx "" "uuclean: uucp" "spool directory clean-up." "" uuclean.1m
.xx "" "lpr: line printer" "spooler." "" lpr.1
.xx "" "lpadmin: configure the LP" "spooling system." "" lpadmin.1m
.xx "output." "printf, fprintf," "sprintf: print formatted" "" printf.3s
.xx "numeric data in a machine/" "" "sputl, sgetl: access long" "" sputl.3x
.xx "power,/" "exp, log, log10, pow," "sqrt: exponential, logarithm," "" exp.3m
.xx "" "exponential, logarithm, power," "square root functions." "/sqrt:" exp.3m
.xx "generator." "rand," "srand: simple random-number" "" rand.3c
.xx "" "/nrand48, mrand48, jrand48," "srand48, seed48, lcong48:/" "" drand48.3c
.xx "" "formats suitable for Motorola" "S-record downloading." "/ASCII" hex.1
.xx "" "rcvhex: translates Motorola" "S-records from downloading/" "" rcvhex.1
.xx "input." "scanf, fscanf," "sscanf: convert formatted" "" scanf.3s
.xx "signals." "" "ssignal, gsignal: software" "" ssignal.3c
.xx "spaced." "" "ssp: make output single" "" ssp.1
.xx "package." "stdio:" "standard buffered input/output" "" stdio.3s
.xx "communication/" "stdipc:" "standard interprocess" "" stdipc.3c
.xx "" "sh, rsh: shell, the" "standard/restricted command/" "" sh.1
.xx "" "twinkle: twinkle" "stars on the screen." "" twinkle.6
.xx "" "lpsched, lpshut, lpmove:" "start/stop the LP request/" "" lpsched.1m
.xx "" "boot:" "startup procedures." "" boot.8
.xx "" "/prtacct, runacct, shutacct," "startup, turnacct: shell/" "" acctsh.1m
.xx "system call." "" "stat: data returned by stat" "" stat.5
.xx "" "" "stat, fstat: get file status." "" stat.2
.xx "" "stat: data returned by" "stat system call." "" stat.5
.xx "" "ustat: get file system" "statistics." "" ustat.2
.xx "" "f\&f: list file names and" "statistics for a file system." "" ff.1m
.xx "" "rstat: network" "statistics program" "" rstat.1
.xx "" "communication facilities" "status." "/report inter-process" ipcs.1
.xx "" "ps: report process" "status." "" ps.1
.xx "" "stat, fstat: get file" "status." "" stat.2
.xx "" "lpstat: print LP" "status information." "" lpstat.1
.xx "" "feof, clearerr, fileno: stream" "status inquiries." "ferror," ferror.3s
.xx "control." "uustat: uucp" "status inquiry and job" "" uustat.1c
.xx "" "ruptime: show host" "status of local machines" "" ruptime.1
.xx "input/output package." "" "stdio: standard buffered" "" stdio.3s
.xx "communication package." "" "stdipc: standard interprocess" "" stdipc.3c
.xx "" "" "stime: set time." "" stime.2
.xx "" "wait for child process to" "stop or terminate." "wait:" wait.2
.xx "strncmp, strcpy, strncpy,/" "" "strcat, strncat, strcmp," "" string.3c
.xx "" "/strcpy, strncpy, strlen," "strchr, strrchr, strpbrk,/" "" string.3c
.xx "strncpy,/" "strcat, strncat," "strcmp, strncmp, strcpy," "" string.3c
.xx "" "/strncat, strcmp, strncmp," "strcpy, strncpy, strlen,/" "" string.3c
.xx "" "/strrchr, strpbrk, strspn," "strcspn, strtok: string/" "" string.3c
.xx "" "fflush: close or flush a" "stream." "fclose," fclose.3s
.xx "" "fopen, freopen, fdopen: open a" "stream." "" fopen.3s
.xx "" "reposition a file pointer in a" "stream." "fseek, rewind, ftell:" fseek.3s
.xx "" "get character or word from" "stream." "/getchar, fgetc, getw:" getc.3s
.xx "" "fgets: get a string from a" "stream." "gets," gets.3s
.xx "" "put character or word on a" "stream." "/putchar, fputc, putw:" putc.3s
.xx "" "puts, fputs: put a string on a" "stream." "" puts.3s
.xx "" "setbuf: assign buffering to a" "stream." "" setbuf.3s
.xx "" "push character back into input" "stream." "ungetc:" ungetc.3s
.xx "" "sed:" "stream editor." "" sed.1
.xx "" "/feof, clearerr, fileno:" "stream status inquiries." "" ferror.3s
.xx "" "long integer and base-64 ASCII" "string." "/l64a: convert between" a64l.3c
.xx "" "convert date and time to" "string." "/asctime, tzset:" ctime.3c
.xx "" "floating-point number to" "string." "/fcvt, gcvt: convert" ecvt.3c
.xx "" "gps: graphical primitive" "string, format of graphical/" "" gps.4
.xx "" "gets, fgets: get a" "string from a stream." "" gets.3s
.xx "" "puts, fputs: put a" "string on a stream." "" puts.3s
.xx "" "strspn, strcspn, strtok:" "string operations." "/strpbrk," string.3c
.xx "number." "atof: convert ASCII" "string to floating-point" "" atof.3c
.xx "" "strtol, atol, atoi: convert" "string to integer." "" strtol.3c
.xx "strings in an object, or/" "" "strings: find the printable" "" strings.1
.xx "" "strings: find the printable" "strings in an object, or other/" "" strings.1
.xx "relocation bits." "" "strip: remove symbols and" "" strip.1
.xx "" "/strncmp, strcpy, strncpy," "strlen, strchr, strrchr,/" "" string.3c
.xx "strcpy, strncpy,/" "strcat," "strncat, strcmp, strncmp," "" string.3c
.xx "" "strcat, strncat, strcmp," "strncmp, strcpy, strncpy,/" "" string.3c
.xx "" "/strcmp, strncmp, strcpy," "strncpy, strlen, strchr,/" "" string.3c
.xx "" "/strlen, strchr, strrchr," "strpbrk, strspn, strcspn,/" "" string.3c
.xx "" "/strncpy, strlen, strchr," "strrchr, strpbrk, strspn,/" "" string.3c
.xx "" "/strchr, strrchr, strpbrk," "strspn, strcspn, strtok:/" "" string.3c
.xx "" "/strpbrk, strspn, strcspn," "strtok: string operations." "" string.3c
.xx "string to integer." "" "strtol, atol, atoi: convert" "" strtol.3c
.xx "" "processes using a file or file" "structure." "fuser: identify" fuser.1m
.xx "terminal." "" "stty: set the options for a" "" stty.1
.xx "another user." "" "su: become super-user or" "" su.1
.xx "" "plot: graphics interface" "subroutines." "" plot.3x
.xx "" "intro: introduction to" "subroutines and libraries." "" intro.3
.xx "" "/same lines of several files or" "subsequent lines of one file." "" paste.1
.xx "" "/files into ASCII formats" "suitable for Motorola S-record/" "" hex.1
.xx "file." "sum7:" "sum and count blocks in a" "" sum7.1
.xx "the files in the/" "sumdir:" "sum and count characters in" "" sumdir.1
.xx "count of a file." "" "sum: print checksum and block" "" sum.1
.xx "a file." "" "sum7: sum and count blocks in" "" sum7.1
.xx "characters in the files in/" "" "sumdir: sum and count" "" sumdir.1
.xx "" "du:" "summarize disk usage." "" du.1
.xx "accounting/" "acctcms: command" "summary from per-process" "" acctcms.1m
.xx "" "sync: update the" "super block." "" sync.1
.xx "" "sync: update" "super-block." "" sync.2
.xx "" "su: become" "super-user or another user." "" su.1
.xx "interval." "sleep:" "suspend execution for an" "" sleep.1
.xx "interval." "sleep:" "suspend execution for" "" sleep.3c
.xx "" "pause:" "suspend process until signal." "" pause.2
.xx "" "" "swab: swap bytes." "" swab.3c
.xx "" "swab:" "swap bytes." "" swab.3c
.xx "" "strip: remove" "symbols and relocation bits." "" strip.1
.xx "" "" "sync: update super-block." "" sync.2
.xx "" "" "sync: update the super block." "" sync.1
.xx "" "select:" "synchronous i/o multiplexing." "" select.2
.xx "" "interpreter) with C-like" "syntax." "csh: a shell (command" csh.1
.xx "error/" "perror, errno," "sys_errlist, sys_nerr: system" "" perror.3c
.xx "" "perror, errno, sys_errlist," "sys_nerr: system error/" "" perror.3c
.xx "information." "uvar: returns" "system-specific configuration" "" uvar.2
.xx "" "uuto, uupick: public UNIX" "System-to-UNIX System file/" "" uuto.1c
.xx "" "master device information" "table." "master:" master.4
.xx "" "mnttab: mounted file system" "table." "" mnttab.4
.xx "" "setmnt: establish mount" "table." "" setmnt.1m
.xx "" "/etc/hosts: host" "table for bnet." "" hosts.7
.xx "" "hdestroy: manage hash search" "tables." "hsearch, hcreate," hsearch.3c
.xx "" "tbl: format" "tables for nroff or troff." "" tbl.1
.xx "" "tabs: set" "tabs on a terminal." "" tabs.1
.xx "" "" "tabs: set tabs on a terminal." "" tabs.1
.xx "" "ctags: maintain a" "tags file for a C program." "" ctags.1
.xx "a file." "" "tail: deliver the last part of" "" tail.1
.xx "remote machine." "" "take: takes a file from a" "" take.1c
.xx "remote machine.." "" "take7: takes a file from a" "" take7.1c
.xx "machine." "take:" "takes a file from a remote" "" take.1c
.xx "machine.." "take7:" "takes a file from a remote" "" take7.1c
.xx "trigonometric/" "sin, cos," "tan, asin, acos, atan, atan2:" "" trig.3m
.xx "" "sinh, cosh," "tanh: hyperbolic functions." "" sinh.3m
.xx "" "recover files from a backup" "tape." "frec:" frec.1m
.xx "" "tp: manipulate" "tape archive." "" tp.1
.xx "" "hpio: HP 2645A terminal" "tape file archiver." "" hpio.1
.xx "" "tar:" "tape file archiver." "" tar.1
.xx "" "tp: magnetic" "tape format." "" tp.4
.xx "file system backup." "filesave," "tapesave: daily/weekly UNIX" "" filesave.1m
.xx "" "" "tar: tape file archiver." "" tar.1
.xx "" "programs for simple lexical" "tasks." "lex: generate" lex.1
.xx "" "deroff: remove nroff/troff," "tbl, and eqn constructs." "" deroff.1
.xx "or troff." "" "tbl: format tables for nroff" "" tbl.1
.xx "" "" "tc: phototypesetter simulator." "" tc.1
.xx "Control Protocol." "" "tcp: Internet Transmission" "" tcp.5
.xx "search trees." "tsearch," "tdelete, twalk: manage binary" "" tsearch.3c
.xx "" "" "tee: pipe fitting." "" tee.1
.xx "" "4014: paginator for the" "Tektronix 4014 terminal." "" 4014.1
.xx "state." "reset: reset the" "teletype bits to a sensible" "" reset.1
.xx "" "last logins of users and" "teletypes." "last: indicate" last.1
.xx "initialization." "init," "telinit: process control" "" init.1m
.xx "temporary file." "tmpnam," "tempnam: create a name for a" "" tmpnam.3s
.xx "" "tmpfile: create a" "temporary file." "" tmpfile.3s
.xx "" "tempnam: create a name for a" "temporary file." "tmpnam," tmpnam.3s
.xx "terminals." "" "term: conventional names for" "" term.5
.xx "data base." "" "termcap: terminal capability" "" termcap.5
.xx "" "for the Tektronix 4014" "terminal." "4014: paginator" 4014.1
.xx "" "functions of the DASI 450" "terminal." "450: handle special" 450.1
.xx "" "ct: spawn getty to a remote" "terminal." "" ct.1c
.xx "" "generate file name for" "terminal." "ctermid:" ctermid.3s
.xx "" "stty: set the options for a" "terminal." "" stty.1
.xx "" "tabs: set tabs on a" "terminal." "" tabs.1
.xx "" "isatty: find name of a" "terminal." "ttyname," ttyname.3c
.xx "" "animate worms on a display" "terminal." "worms:" worms.6
.xx "" "termcap:" "terminal capability data base." "" termcap.5
.xx "" "greek: select" "terminal filter." "" greek.1
.xx "" "/tgetstr, tgoto, tputs:" "terminal independent operation/" "" termcap.3
.xx "" "termio: general" "terminal interface." "" termio.7
.xx "" "tty: controlling" "terminal interface." "" tty.7
.xx "" "dial: establish an out-going" "terminal line connection." "" dial.3c
.xx "" "tset: set" "terminal modes." "" tset.1
.xx "" "clear: clear" "terminal screen." "" clear.1
.xx "getty." "gettydefs: speed and" "terminal settings used by" "" gettydefs.4
.xx "" "hpio: HP 2645A" "terminal tape file archiver." "" hpio.1
.xx "and line/" "getty: set" "terminal type, modes, speed," "" getty.1m
.xx "" "ttytype: data base of" "terminal types by port." "" ttytype.4
.xx "" "functions of DASI 300 and 300s" "terminals." "/handle special" 300.1
.xx "" "of HP 2640 and 2621-series" "terminals." "/special functions" hp.1
.xx "" "se: screen editor for video" "terminals." "" se.1
.xx "" "term: conventional names for" "terminals." "" term.5
.xx "" "tty: get the" "terminal's name." "" tty.1
.xx "" "for child process to stop or" "terminate." "wait: wait" wait.2
.xx "" "kill:" "terminate a process." "" kill.1
.xx "" "shutdown:" "terminate all processing." "" shutdown.1m
.xx "" "exit, _exit:" "terminate process." "" exit.2
.xx "daemon." "errstop:" "terminate the error-logging" "" errstop.1m
.xx "interface." "" "termio: general terminal" "" termio.7
.xx "command." "" "test: condition evaluation" "" test.1
.xx "" "quiz:" "test your knowledge." "" quiz.6
.xx "" "nroff: format" "text." "" nroff.1
.xx "" "troff: typeset" "text." "" troff.1
.xx "" "ed, red:" "text editor." "" ed.1
.xx "" "ex, edit:" "text editor" "" ex.1
.xx "" "change the format of a" "text file." "newform:" newform.1
.xx "" "fspec: format specification in" "text files." "" fspec.4
.xx "" "/checkeq: format mathematical" "text for nroff or troff." "" eqn.1
.xx "" "prepare constant-width" "text for troff." "cw, checkcw:" cw.1
.xx "typesetting." "nroff7:" "text formatting and" "" nroff7.1
.xx "typesetting." "troff7:" "text formatting and" "" troff7.1
.xx "" "plock: lock process," "text, or data in memory." "" plock.2
.xx "tgetstr, tgoto, tputs:/" "" "tgetent, tgetnum, tgetflag," "" termcap.3
.xx "tputs:/" "tgetent, tgetnum," "tgetflag, tgetstr, tgoto," "" termcap.3
.xx "tgoto, tputs:/" "tgetent," "tgetnum, tgetflag, tgetstr," "" termcap.3
.xx "" "tgetent, tgetnum, tgetflag," "tgetstr, tgoto, tputs:/" "" termcap.3
.xx "" "/tgetnum, tgetflag, tgetstr," "tgoto, tputs: terminal/" "" termcap.3
.xx "" "ttt, cubic:" "tic-tac-toe." "" ttt.6
.xx "" "execute commands at a later" "time." "at:" at.1
.xx "" "systems for optimal access" "time." "dcopy: copy file" dcopy.1m
.xx "" "up an environment at login" "time." "profile: setting" profile.4
.xx "" "stime: set" "time." "" stime.2
.xx "" "time: get" "time." "" time.2
.xx "" "time:" "time a command." "" time.1
.xx "data and system/" "timex:" "time a command; report process" "" timex.1
.xx "" "" "time: get time." "" time.2
.xx "" "- tune floppy disk settling" "time parameters." "disktune" disktune.1m
.xx "" "profil: execution" "time profile." "" profil.2
.xx "" "" "time: time a command." "" time.1
.xx "" "tzset: convert date and" "time to string." "/asctime," ctime.3c
.xx "" "clock: report CPU" "time used." "" clock.3c
.xx "" "get process and child process" "times." "times:" times.2
.xx "" "file access and modification" "times." "utime: set" utime.2
.xx "process times." "" "times: get process and child" "" times.2
.xx "" "update access and modification" "times of a file." "touch:" touch.1
.xx "process data and system/" "" "timex: time a command; report" "" timex.1
.xx "file." "" "tmpfile: create a temporary" "" tmpfile.3s
.xx "for a temporary file." "" "tmpnam, tempnam: create a name" "" tmpnam.3s
.xx "" "/tolower, _toupper, _tolower," "toascii: translate characters." "" conv.3c
.xx "" "popen, pclose: initiate pipe" "to/from a process." "" popen.3s
.xx "" "toupper, tolower, _toupper," "_tolower, toascii: translate/" "" conv.3c
.xx "toascii: translate/" "toupper," "tolower, _toupper, _tolower," "" conv.3c
.xx "" "tsort:" "topological sort." "" tsort.1
.xx "" "acctmerg: merge or add" "total accounting files." "" acctmerg.1m
.xx "modification times of a file." "" "touch: update access and" "" touch.1
.xx "translate/" "toupper, tolower," "_toupper, _tolower, toascii:" "" conv.3c
.xx "_tolower, toascii: translate/" "" "toupper, tolower, _toupper," "" conv.3c
.xx "" "" "tp: magnetic tape format." "" tp.4
.xx "" "" "tp: manipulate tape archive." "" tp.1
.xx "" "" "tplot: graphics filters." "" tplot.1g
.xx "" "/tgetflag, tgetstr, tgoto," "tputs: terminal independent/" "" termcap.3
.xx "" "" "tr: translate characters." "" tr.1
.xx "" "ptrace: process" "trace." "" ptrace.2
.xx "" "blt, blt512: block" "transfer data." "" blt.3
.xx "" "/_toupper, _tolower, toascii:" "translate characters." "" conv.3c
.xx "" "tr:" "translate characters." "" tr.1
.xx "from downloading into/" "rcvhex:" "translates Motorola S-records" "" rcvhex.1
.xx "ASCII formats suitable/" "hex:" "translates object files into" "" hex.1
.xx "" "tcp: Internet" "Transmission Control Protocol." "" tcp.5
.xx "" "ftw: walk a file" "tree." "" ftw.3c
.xx "" "twalk: manage binary search" "trees." "tsearch, tdelete," tsearch.3c
.xx "" "" "trek: trekkie game." "" trek.6
.xx "" "trek:" "trekkie game." "" trek.6
.xx "" "tan, asin, acos, atan, atan2:" "trigonometric functions." "/cos," trig.3m
.xx "" "constant-width text for" "troff." "cw, checkcw: prepare" cw.1
.xx "" "mathematical text for nroff or" "troff." "/neqn, checkeq: format" eqn.1
.xx "" "format tables for nroff or" "troff." "tbl:" tbl.1
.xx "typesetting view graphs/" "mv: a" "troff macro package for" "" mv.5
.xx "" "" "troff: typeset text." "" troff.1
.xx "typesetting." "" "troff7: text formatting and" "" troff7.1
.xx "values." "" "true, false: provide truth" "" true.1
.xx "" "m68k, pdp11, u3b, vax: provide" "truth value about your/" "" machid.1
.xx "" "true, false: provide" "truth values." "" true.1
.xx "robots." "chase:" "Try to escape the killer" "" chase.6
.xx "manage binary search trees." "" "tsearch, tdelete, twalk:" "" tsearch.3c
.xx "" "" "tset: set terminal modes." "" tset.1
.xx "" "" "tsort: topological sort." "" tsort.1
.xx "" "" "ttt, cubic: tic-tac-toe." "" ttt.6
.xx "interface." "" "tty: controlling terminal" "" tty.7
.xx "" "" "tty: get the terminal's name." "" tty.1
.xx "" "graphics for the extended" "TTY-37 type-box." "greek:" greek.5
.xx "a terminal." "" "ttyname, isatty: find name of" "" ttyname.3c
.xx "utmp file of the current/" "" "ttyslot: find the slot in the" "" ttyslot.3c
.xx "types by port." "" "ttytype: data base of terminal" "" ttytype.4
.xx "parameters." "disktune -" "tune floppy disk settling time" "" disktune.1m
.xx "" "/runacct, shutacct, startup," "turnacct: shell procedures for/" "" acctsh.1m
.xx "trees." "tsearch, tdelete," "twalk: manage binary search" "" tsearch.3c
.xx "" "twinkle:" "twinkle stars on the screen." "" twinkle.6
.xx "screen." "" "twinkle: twinkle stars on the" "" twinkle.6
.xx "" "file: determine file" "type." "" file.1
.xx "" "value about your processor" "type." "/u3b, vax: provide truth" machid.1
.xx "" "getty: set terminal" "type, modes, speed, and line/" "" getty.1m
.xx "" "for the extended TTY-37" "type-box." "greek: graphics" greek.5
.xx "" "types: primitive system data" "types." "" types.5
.xx "" "ttytype: data base of terminal" "types by port." "" ttytype.4
.xx "types." "" "types: primitive system data" "" types.5
.xx "graphs, and slides." "mmt, mvt:" "typeset documents, view" "" mmt.1
.xx "" "troff:" "typeset text." "" troff.1
.xx "" "nroff7: text formatting and" "typesetting." "" nroff7.1
.xx "" "troff7: text formatting and" "typesetting." "" troff7.1
.xx "" "mv: a troff macro package for" "typesetting view graphs and/" "" mv.5
.xx "" "/localtime, gmtime, asctime," "tzset: convert date and time/" "" ctime.3c
.xx "about your/" "m68k, pdp11," "u3b, vax: provide truth value" "" machid.1
.xx "Protocol." "" "udp: Internet User Datagram" "" udp.5
.xx "" "getpw: get name from" "UID." "" getpw.3c
.xx "" "" "ul: do underlining." "" ul.1
.xx "limits." "" "ulimit: get and set user" "" ulimit.2
.xx "creation mask." "" "umask: set and get file" "" umask.2
.xx "mask." "" "umask: set file-creation mode" "" umask.1
.xx "file system." "mount," "umount: mount and dismount" "" mount.1m
.xx "" "" "umount: unmount a file system." "" umount.2
.xx "UNIX system." "" "uname: get name of current" "" uname.2
.xx "UNIX System." "" "uname: print name of current" "" uname.1
.xx "" "ul: do" "underlining." "" ul.1
.xx "file." "unget:" "undo a previous get of an SCCS" "" unget.1
.xx "an SCCS file." "" "unget: undo a previous get of" "" unget.1
.xx "into input stream." "" "ungetc: push character back" "" ungetc.3s
.xx "" "/seed48, lcong48: generate" "uniformly distributed/" "" drand48.3c
.xx "a file." "" "uniq: report repeated lines in" "" uniq.1
.xx "" "mktemp: make a" "unique file name." "" mktemp.3c
.xx "" "" "units: conversion program." "" units.1
.xx "unlink system calls." "link," "unlink: exercise link and" "" link.1m
.xx "entry." "" "unlink: remove directory" "" unlink.2
.xx "" "unlink: exercise link and" "unlink system calls." "link," link.1m
.xx "" "umount:" "unmount a file system." "" umount.2
.xx "files." "pack, pcat," "unpack: compress and expand" "" pack.1
.xx "" "lsearch: linear search and" "update." "" lsearch.3c
.xx "times of a file." "touch:" "update access and modification" "" touch.1
.xx "of programs." "make: maintain," "update, and regenerate groups" "" make.1
.xx "" "badblk: program to set or" "update bad block information." "" badblk.1m
.xx "machines." "updater:" "update files between two" "" updater.1
.xx "machines." "updater:" "update files between two" "" updater.1m
.xx "" "sync:" "update super-block." "" sync.2
.xx "" "sync:" "update the super block." "" sync.1
.xx "two machines." "" "updater: update files between" "" updater.1
.xx "two machines." "" "updater: update files between" "" updater.1m
.xx "" "du: summarize disk" "usage." "" du.1
.xx "" "character login name of the" "user." "cuserid: get" cuserid.3s
.xx "" "logname: return login name of" "user." "" logname.3x
.xx "" "become super-user or another" "user." "su:" su.1
.xx "" "the utmp file of the current" "user." "/find the slot in" ttyslot.3c
.xx "" "write: write to another" "user." "" write.1
.xx "" "setuid, setgid: set" "user and group IDs." "" setuid.2
.xx "" "id: print" "user and group IDs and names." "" id.1
.xx "" "udp: Internet" "User Datagram Protocol." "" udp.5
.xx "" "/getgid, getegid: get real" "user, effective user, real/" "" getuid.2
.xx "" "environ:" "user environment." "" environ.4
.xx "" "environ:" "user environment." "" environ.5
.xx "" "ulimit: get and set" "user limits." "" ulimit.2
.xx "" "/get real user, effective" "user, real group, and/" "" getuid.2
.xx "" "wall: write to all" "users." "" wall.1m
.xx "" "last: indicate last logins of" "users and teletypes." "" last.1
.xx "" "mail, rmail: send mail to" "users or read mail." "" mail.1
.xx "" "fuser: identify processes" "using a file or file/" "" fuser.1m
.xx "statistics." "" "ustat: get file system" "" ustat.2
.xx "modification times." "" "utime: set file access and" "" utime.2
.xx "" "utmp, wtmp:" "utmp and wtmp entry formats." "" utmp.4
.xx "" "endutent, utmpname: access" "utmp file entry." "/setutent," getut.3c
.xx "" "ttyslot: find the slot in the" "utmp file of the current user." "" ttyslot.3c
.xx "entry formats." "" "utmp, wtmp: utmp and wtmp" "" utmp.4
.xx "" "/pututline, setutent, endutent," "utmpname: access utmp file/" "" getut.3c
.xx "clean-up." "" "uuclean: uucp spool directory" "" uuclean.1m
.xx "" "uusub: monitor" "uucp network." "" uusub.1m
.xx "" "uuclean:" "uucp spool directory clean-up." "" uuclean.1m
.xx "control." "uustat:" "uucp status inquiry and job" "" uustat.1c
.xx "unix copy." "" "uucp, uulog, uuname: unix to" "" uucp.1c
.xx "copy." "uucp," "uulog, uuname: unix to unix" "" uucp.1c
.xx "" "uucp, uulog," "uuname: unix to unix copy." "" uucp.1c
.xx "System-to-UNIX System/" "uuto," "uupick: public UNIX" "" uuto.1c
.xx "and job control." "" "uustat: uucp status inquiry" "" uustat.1c
.xx "" "" "uusub: monitor uucp network." "" uusub.1m
.xx "System-to-UNIX System file/" "" "uuto, uupick: public UNIX" "" uuto.1c
.xx "execution." "" "uux: unix to unix command" "" uux.1c
.xx "configuration information." "" "uvar: returns system-specific" "" uvar.2
.xx "" "" "val: validate SCCS file." "" val.1
.xx "" "val:" "validate SCCS file." "" val.1
.xx "" "abs: return integer absolute" "value." "" abs.3c
.xx "" "/pdp11, u3b, vax: provide truth" "value about your processor/" "" machid.1
.xx "" "getenv: return" "value for environment name." "" getenv.3c
.xx "" "ceiling, remainder, absolute" "value functions." "/fabs: floor," floor.3m
.xx "" "true, false: provide truth" "values." "" true.1
.xx "your/" "m68k, pdp11, u3b," "vax: provide truth value about" "" machid.1
.xx "" "" "vc: version control." "" vc.1
.xx "" "" "vchk: version checkup." "" vchk.1m
.xx "" "option letter from argument" "vector." "getopt: get" getopt.3c
.xx "" "assert:" "verify program assertion." "" assert.3x
.xx "" "of directory (Berkeley" "version)." "ls7: list contents" ls7.1
.xx "" "vchk:" "version checkup." "" vchk.1m
.xx "" "vc:" "version control." "" vc.1
.xx "" "version: reports" "version number of files." "" version.1
.xx "" "get: get a" "version of an SCCS file." "" get.1
.xx "number of files." "" "version: reports version" "" version.1
.xx "" "sccsdiff: compare two" "versions of an SCCS file." "" sccsdiff.1
.xx "(visual) display editor based/" "" "vi, view: screen oriented" "" vi.1
.xx "" "se: screen editor for" "video terminals." "" se.1
.xx "" "mmt, mvt: typeset documents," "view graphs, and slides." "" mmt.1
.xx "" "macro package for typesetting" "view graphs and slides." "/troff" mv.5
.xx "display editor based on/" "vi," "view: screen oriented (visual)" "" vi.1
.xx "" "file perusal filter for crt" "viewing." "more:" more.1
.xx "on/" "vi, view: screen oriented" "(visual) display editor based" "" vi.1
.xx "systems with label checking." "" "volcopy, labelit: copy file" "" volcopy.1m
.xx "" "file system: format of system" "volume." "" fs.4
.xx "process." "" "wait: await completion of" "" wait.1
.xx "or terminate." "wait:" "wait for child process to stop" "" wait.2
.xx "to stop or terminate." "" "wait: wait for child process" "" wait.2
.xx "" "ftw:" "walk a file tree." "" ftw.3c
.xx "" "" "wall: write to all users." "" wall.1m
.xx "" "" "wc: word count." "" wc.1
.xx "" "see: see" "what a file has in it." "" see.1
.xx "" "" "what: identify SCCS files." "" what.1
.xx "signal." "signal: specify" "what to do upon receipt of a" "" signal.2
.xx "crashes." "crash:" "what to do when the system" "" crash.8
.xx "" "whodo:" "who is doing what." "" whodo.1m
.xx "machines" "rwho:" "who is logged in on local" "" rwho.1
.xx "" "who:" "who is on the system." "" who.1
.xx "" "" "who: who is on the system." "" who.1
.xx "" "" "whodo: who is doing what." "" whodo.1m
.xx "" "cd: change" "working directory." "" cd.1
.xx "" "chdir: change" "working directory." "" chdir.2
.xx "" "get pathname of current" "working directory." "getcwd:" getcwd.3c
.xx "" "pwd:" "working directory name." "" pwd.1
.xx "" "worm: Play the growing" "worm game." "" worm.6
.xx "game." "" "worm: Play the growing worm" "" worm.6
.xx "display terminal." "" "worms: animate worms on a" "" worms.6
.xx "" "worms: animate" "worms on a display terminal." "" worms.6
.xx "" "write:" "write on a file." "" write.2
.xx "" "putpwent:" "write password file entry." "" putpwent.3c
.xx "" "wall:" "write to all users." "" wall.1m
.xx "" "write:" "write to another user." "" write.1
.xx "" "" "write: write on a file." "" write.2
.xx "" "" "write: write to another user." "" write.1
.xx "" "file regions for reading or" "writing." "/provide exclusive" lockf.2
.xx "" "open: open for reading or" "writing." "" open.2
.xx "" "utmp, wtmp: utmp and" "wtmp entry formats." "" utmp.4
.xx "formats." "utmp," "wtmp: utmp and wtmp entry" "" utmp.4
.xx "accounting records." "fwtmp," "wtmpfix: manipulate connect" "" fwtmp.1m
.xx "hunt-the-wumpus." "" "wump: the game of" "" wump.6
.xx "list(s) and execute command." "" "xargs: construct argument" "" xargs.1
.xx "" "j0, j1, jn," "y0, y1, yn: Bessel functions." "" bessel.3m
.xx "" "j0, j1, jn, y0," "y1, yn: Bessel functions." "" bessel.3m
.xx "compiler-compiler." "" "yacc: yet another" "" yacc.1
.xx "" "j0, j1, jn, y0, y1," "yn: Bessel functions." "" bessel.3m
