NAME
	reset

SYNOPSIS
	r[eset]

DESCRIPTION
	The reset command performs a software reset to set the system back to a
	known state.  The software reset closes and opens the serial channel 
	and sets the internal software state machine to an invalid state.  
	This command should be executed if the system power is cycled and PSD 
	is not re-invoked.  Closing and opening the scan channel will flush any
	erroneous characters which may be received when the system power is
	cycled.  Setting the software state machine to an invalid state will
	cause the nodes to be automatically reset and initialized as required
	by each test.

