This patch contains files to fix XSIMMAKE problems for Workview Office 7.2.  
These updates are for running xsimmake on Windows 95 and Windows NT 3.51.  

Copy these files to your system, placing them in the listed directories.

Contents:
-------
wvoffice\lmgr324a.dll         -- WVO DLLs which make check and vsm work 
wvoffice\lmgr324b.dll         -- when invoked by xsimmake.

xact\data\xsimmake.xfw        -- Calls vsm_ngui.exe instead of vsm.exe,
                              -- and works around a vsmupd problem.
This file assumes you are using the names of the VSM executables as they are
delivered by Viewlogic:  VSM.EXE for the Windows GUI and VSM_NGUI.EXE for
the DOS version.  If you have done the workaround we prescribed before this
patch was available, you'll have to undo those steps.  Don't forget to modify
the tools menu, so Create Digital Netlist calls VSM.EXE.

Also, if you see that there are no values annotated to your schematic
during a timing simulation, type this on the command line in ViewSim:
 schemnam sdesign 
where "sdesign" is the name of your top level design prepended by the 
letter "s".

windows\system\blue.386       -- Fixes device conflict (blue screen).
  Modify your windows\system.ini file by adding this line after the 
[386Enh] header:
device=blue.386
